FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Milan Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2007 Mercury Milan Vapor Canister Part Number: 9E5Z-9D653-C
$292.11 MSRP: $496.36You Save: $204.25 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 9E5Z-9D653-B, CX-2151, 8E5Z-9D653-A, 7E5Z-9D653-B, 7E5Z-9D653-E
- Base No.: 9D653A
- Item Weight: 7.20 Pounds
- Item Dimensions: 10.3 x 17.9 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-9D653-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Milan Vapor Canister Part Number: 9E5Z-9D653-A
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 6E5Z-9D653-AB, 7E5Z-9D653-A, 7E5Z-9D653-D
- Base No.: 9D653
- Item Weight: 5.80 Pounds
- Item Dimensions: 20.0 x 4.4 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Milan Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Milan Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Milan Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Milan Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2007 Mercury Milan?A: The evaporative emission control canister service requires the car to be in neutral position on a hoist system. Disconnecting the battery ground cable reduces electrical spark formation that could begin fuel vapor ignition. The service starts by detaching the electrical connector from the evap canister vent solenoid and then moving to disconnect the vapor tube from the dust separator. Use proper tools to detach the two quick connect fittings from the evap canister assembly vapor tube. You can remove the evap canister assembly through the process of unfastening two nuts and two bolts. To install the new canister it is vital to set the fasteners at 6 Nm (53 lb-in) torque before reversing the removal steps. The evaporative emission system leak test should follow the repair verification drive cycle to verify system functionality.