FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Milan Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2006 Mercury Milan Vapor Canister Part Number: 9E5Z-9D653-A
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 6E5Z-9D653-AB, 7E5Z-9D653-A, 7E5Z-9D653-D
- Base No.: 9D653
- Item Weight: 5.80 Pounds
- Item Dimensions: 20.0 x 4.4 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Milan Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Milan Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Milan Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Milan Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2006 Mercury Milan?A: Service and repair of the evaporative emission control canister requires the vehicle to be placed into neutral position while mounted on a hoist. You should disconnect the battery ground cable to stop electrical sparks from forming and creating a risk that could ignite fuel vapors. Fuel-related components must remain free from smoking and open flames as well as personal electronic devices because their contents contain highly flammable mixtures. The evaporative emission (EVAP) canister vent solenoid needs its electrical connector removed before taking the fuel vapor hose off from the vent solenoid and dust separator assembly. Take out both quick connect couplings from the EVAP canister assembly before removing its two bolts and two nuts. The fasteners require torque tightening to reach 6 Nm (53 lb-in) during new canister installation while using the same uninstallation steps. After completing the installation run an evaporative emission system leak test together with the evaporative emission repair verification drive cycle to verify proper system operation.