FordParts
My Garage
My Account
Cart
OEM 2008 Ford Crown Victoria Automatic Transmission Shift Levers
Automatic Transmission Shifter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Automatic Transmission Shift Levers found
Product Specifications- Other Name: Lever; Automatic Transmission Shift Lever; Gear Shift Assembly
- Replaces: 5W1Z-7210-AAL
- Base No.: 7210
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.5 x 6.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Shift Lever, Camel Part Number: 8W1Z-7210-AB
Product Specifications- Other Name: Lever; Automatic Transmission Shift Lever; Gear Shift Assembly
- Replaces: 5W1Z-7210-AAJ
- Base No.: 7210
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 2.9 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-7210-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Lever; Automatic Transmission Shift Lever; Gear Shift Assembly
- Replaces: 5W1Z-7210-AAK
- Base No.: 7210
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.1 x 6.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-7210-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Crown Victoria Automatic Transmission Shift Levers
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Crown Victoria Automatic Transmission Shift Levers available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Crown Victoria Automatic Transmission Shift Levers as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Crown Victoria Automatic Transmission Shift Levers Parts Q&A
- Q: How to Service and Repair Automatic Transmission Shift Levers for the Column Shift on 2008 Ford Crown Victoria?A: Before working on the column shift automatic transmission shift levers, you should remove the back up power supply to avoid unintentional air bag activation. The battery ground cable needs removal first, followed by waiting for at least one minute while disconnecting all auxiliary power supplies and batteries. Secondly, remove the lower steering column opening finish panel through screw removal, followed by arranging the parking brake release handle out of the way and then removing another screw from the panel. Gravity will activate the retaining clips until you fully extract the panel by pulling it away. Five screws must be removed from the lower steering column opening finish panel reinforcement before you can take out the lower steering column shroud by unscrewing three screws. Next, the installment requires elimination of the upper steering column shroud before disconnecting the transmission control (TC) switch harness connector. Disconnect the TC switch harness both from locators and from the automatic transmission shift levers cover, which rests on the steering column. Caution requires specific handling of the automatic transmission shift levers pin because the damage will make it unusable, so throw away the original item and then take out the automatic transmission shift levers. The procedure to install the system includes following the removal instructions in reverse order.