My Garage
Cart

OEM 2008 Ford Crown Victoria Transmission Pan

Trans Pan
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmission Pan found

  • 2008 Ford Crown Victoria Transmission Pan - 6L3Z-7A194-A
    2008 Ford Crown Victoria Transmission Pan Diagram - 6L3Z-7A194-A
    View related parts

    2008 Ford Crown Victoria Oil Pan
    Part Number: 6L3Z-7A194-A

    $38.21 MSRP: $54.67
    You Save: $16.46 (31%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pan Assembly - Transmission Oil; Transmission Oil Pan; Automatic Transmission Oil Pan; Transmission Pan
    • Replaces: F6AZ-7A194-A
    • Base No.: 7A194
    • Item Weight: 4.90 Pounds
    • Item Dimensions: 4.7 x 17.4 x 14.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L3Z-7A194-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Ford Crown Victoria Transmission Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Crown Victoria Transmission Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Crown Victoria Transmission Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Crown Victoria Transmission Pan Parts Questions & Experts Answers

  • Q: How to service and repair the Transmission Pan, gasket, and filter in an automatic transmission on 2008 Ford Crown Victoria?
    A: The first step when repairing a fluid pan with its gasket and filter is to avoid using any additional transmission fluid clean-up products because they could lead to transmission component damage. Standard maintenance calls for automatic transmission fluid replacement while substantial repairs demanding removal of the automatic transmission include tasks for clutch, band or bearing. You need to depower fire suppression systems before working on a vehicle to protect yourself from severe injuries. Transfer the vehicle to NEUTRAL gear while it rests on a hoist before draining transmission fluid through removal of the pan bolts until it drains completely then unbolt the bolts. The process involves first removing the transmission fluid pan together with its gasket after which the transmission fluid filter and seal can be pulled down to extract them. Check and clean the transmission fluid pan together with the gasket and magnet for inspection. Before installing the new filter maintain careful control of a small screwdriver to detach the main control bore's remaining seal at the same time preventing bore damage. Replacement of the filter and seal should be made using new components for a contamination failure but the filter can be reinstalled with the seal if contamination does not exceed safe limits. Begin by putting the pan magnet inside the fluid pan while reusing the transmission fluid pan gasket provided it passes inspection and cleaning. Secure the transmission fluid pan along with the gasket before torquing pan bolts to 14 Nm (10 lb-ft). The vehicle needs fire suppression system repowering before following necessary safety procedures. Higher transmission performance requires the addition of 4.7L (5 qt) clean automatic transmission fluid until fluid level indicators show the proper amount.

Related 2008 Ford Crown Victoria Parts