How to service the oil cooler on 2008 Ford E-150?

The first step to service the oil cooler requires a vehicle in NEUTRAL position which must also sit on a hoist. First drain all fluid from both the oil engine and the engine cooling system. You must cut the coolant hoses from the oil cooler before removing the oil filter which goes into disposal. Detect all metal as well as aluminum foreign materials in the oil cooler so you can address mechanical issues before repairing the engine. Operator should dispose of the worn-out oil cooler included. A new oil cooler should be positioned onto the oil filter adapter so its tab fits into the oil cooler notch before installing the threaded insert with 58 Nm (43 lb-ft) torque. Follow this sequence to install the new oil filter which must be tightened to 16 Nm (12 lb-ft) after which the two coolant hoses should be connected to the oil cooler. Secure the oil drain plug by tightening it to 23 Nm (17 lb-ft). The installation process ends with adding clean engine oil then performing the engine cooling system fill-up and bleed procedures.

OEM 2008 Ford E-150 Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Coolers found

View related parts
2008 Ford E-150 Oil Cooler
Part Number: 2C2Z-6A642-CC
$96.35 MSRP: $119.17
You Save: $22.82 (20%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 2C2Z-6A642-BA
- Base No.: 6A642
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.1 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C2Z-6A642-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-150 Transmission Cooler
Part Number: 9C2Z-7A095-A
$73.35 MSRP: $112.88
You Save: $39.53 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Automatic Transmission Oil Cooler; Automatic Transmission Oil Cooler Assembly; Oil Cooler
- Replaces: 8C2Z-7A095-D
- Base No.: 7A095
- Item Weight: 5.30 Pounds
- Item Dimensions: 20.1 x 19.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-7A095-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2008 Ford E-150 Transmission Cooler
Part Number: 8C2Z-7A095-A
$83.62 MSRP: $121.72
You Save: $38.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Automatic Transmission Oil Cooler; Automatic Transmission Oil Cooler Assembly; Oil Cooler
- Base No.: 7A095
- Item Weight: 2.70 Pounds
- Item Dimensions: 3.4 x 15.5 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-7A095-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-150 Oil Cooler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Oil Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Oil Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Oil Cooler Parts Questions & Experts Answers

Q: How to service the oil cooler on 2008 Ford E-150?
A: The first step to service the oil cooler requires a vehicle in NEUTRAL position which must also sit on a hoist. First drain all fluid from both the oil engine and the engine cooling system. You must cut the coolant hoses from the oil cooler before removing the oil filter which goes into disposal. Detect all metal as well as aluminum foreign materials in the oil cooler so you can address mechanical issues before repairing the engine. Operator should dispose of the worn-out oil cooler included. A new oil cooler should be positioned onto the oil filter adapter so its tab fits into the oil cooler notch before installing the threaded insert with 58 Nm (43 lb-ft) torque. Follow this sequence to install the new oil filter which must be tightened to 16 Nm (12 lb-ft) after which the two coolant hoses should be connected to the oil cooler. Secure the oil drain plug by tightening it to 23 Nm (17 lb-ft). The installation process ends with adding clean engine oil then performing the engine cooling system fill-up and bleed procedures.