OEM 2008 Ford E-150 Washer Pump

2008 Ford E-150 Washer Pump Parts Questions & Experts Answers

• Q: How to service and repair the windshield washer pump and reservoir on 2008 Ford E-150?

  A: Starting the windshield washer pump and reservoir service requires removing the battery tray then unfastening the windshield wiper reservoir bolt and nut followed by tightening this bolt to 4 Nm (35 lb-in) when reinstalling. First remove the filler hose from the reservoir and after that disconnect the washer pump electrical connector and the wiring harness locator. Reading and following all cautions from the product label is essential because improper usage could result in severe personal harm but you should consult with doctors for emergency healthcare requirements. The owner must drain the washer reservoir then disconnect the washer hose before removing the washer pump with the reservoir. The windshield washer pump operation should be avoided before filling the reservoir because it leads to early pump damage. The process of assembly will be identical to the disassembly steps.