How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E Automatic Transaxle/Transmission on 2008 Ford E-250?

The first step for servicing and repairing the transmission mount for 4R70E/4R75E automatic transaxle/transmission requires the vehicle to be lifted and properly supported. Use high-lift transmission jack to position under the transmission before removing its two nuts. Lift the transmission until retainer studs disconnect from the transmission support crossmember and remove the bolts that also detach the insulator and retainer from the mount. Start installation by placing the insulator and retainer in correct position then apply the bolts until they reach a torque of 90 Nm (66 lb-ft). Decrease the jack height but maintain proper positioning of retainer studs that must enter crossmember holes to permit the entire transmission weight to rest on the crossmember. The high-lift transmission jack should be removed to install insulator and retainer pieces onto the crossmember nuts before securing them to 90 Nm (66 lb-ft). Close out the procedure by taking away the supports then lowering the vehicle.

OEM 2008 Ford E-250 Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Motor And Transmission Mounts found

View related parts
2008 Ford E-250 Transmission Mount, Passenger Side
Part Number: F81Z-6068-DA
$33.37 MSRP: $47.33
You Save: $13.96 (30%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount
- Position: Passenger Side
- Replaces: F7UZ-6068-EA
- Base No.: 6068
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6068-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Side Mount, Driver Side
Part Number: F7UZ-6038-DB
$108.09 MSRP: $157.33
You Save: $49.24 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Front Mount
- Position: Driver Side
- Replaces: 3C2Z-6038-AA
- Base No.: 6038
- Item Weight: 8.40 Pounds
- Item Dimensions: 10.3 x 8.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-6038-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Side Mount, Passenger Side
Part Number: F7UZ-6038-DC
$44.39 MSRP: $63.50
You Save: $19.11 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Front Mount
- Position: Passenger Side
- Replaces: F7UZ-6038-DA
- Base No.: 6038
- Item Weight: 9.90 Pounds
- Item Dimensions: 9.9 x 9.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7UZ-6038-DC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Mount Bracket, Passenger Side
Part Number: 8C2Z-6028-A
$43.58 MSRP: $63.43
You Save: $19.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Front Support; Engine Mount Bracket, Right; Motor Mount; Lower Mount; Bracket; Engine Mount Bracket
- Position: Passenger Side
- Replaces: F7UZ-6028-AB
- Base No.: 6028
- Item Weight: 6.00 Pounds
- Item Dimensions: 5.6 x 4.5 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-6028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Mount Bracket, Driver Side
Part Number: 8C2Z-6029-A
$46.13 MSRP: $66.00
You Save: $19.87 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Left; Motor Mount; Lower Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: F7UZ-6029-AA
- Base No.: 6029
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-6029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Engine Support
Part Number: F8UZ-6A023-AA
Product Specifications
- Other Name: Bracket; Engine Mount Crossmember; Transmission Crossmember; Engine Mount Bracket; Transmission Mount; Transmission Support; Trans Crossmember
- Manufacturer Note: 4R100 transmission
- Base No.: 6A023
- Item Weight: 20.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8UZ-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Engine Support
Part Number: 1C2Z-6A023-CA
Product Specifications
- Other Name: Bracket; Engine Mount Crossmember; Transmission Crossmember; Transfer Case Mount; Motor Mount; Mount Bracket; Transmission Support
- Replaces: XC2Z-6A023-AA
- Base No.: 6A023
- Item Weight: 13.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-6A023-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2008 Ford E-250 Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-250 Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E Automatic Transaxle/Transmission on 2008 Ford E-250?
A: The first step for servicing and repairing the transmission mount for 4R70E/4R75E automatic transaxle/transmission requires the vehicle to be lifted and properly supported. Use high-lift transmission jack to position under the transmission before removing its two nuts. Lift the transmission until retainer studs disconnect from the transmission support crossmember and remove the bolts that also detach the insulator and retainer from the mount. Start installation by placing the insulator and retainer in correct position then apply the bolts until they reach a torque of 90 Nm (66 lb-ft). Decrease the jack height but maintain proper positioning of retainer studs that must enter crossmember holes to permit the entire transmission weight to rest on the crossmember. The high-lift transmission jack should be removed to install insulator and retainer pieces onto the crossmember nuts before securing them to 90 Nm (66 lb-ft). Close out the procedure by taking away the supports then lowering the vehicle.