FordParts
My Garage
My Account
Cart
OEM 2008 Ford Edge Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Drive Belts found
2008 Ford Edge Serpentine Belt Part Number: 7T4Z-8620-A
$20.21 MSRP: $32.09You Save: $11.88 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: V-Belt; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Fit Belt; Drive Belt; Power Steering Belt; Water Pump Belt
- Base No.: 8620A
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 0.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-8620-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Serpentine Belt Part Number: BT4Z-8620-A
$31.49 MSRP: $48.73You Save: $17.24 (36%)Product Specifications- Other Name: V-Belt; Accessory Drive Belt; Serpentine Belt Drive Kit; Power Steering Belt; Drive Belt
- Replaces: 8T4Z-8620-A, 7T4Z-8620-C
- Base No.: 8620A
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.2 x 1.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BT4Z-8620-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Drive Belt
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Drive Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Drive Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Edge Drive Belt Parts Q&A
- Q: How to service the accessory drive belt on 2008 Ford Edge?A: Service operations on the accessory drive belt should begin by parking the vehicle in neutral while it rests on a hoist system. A suitable belt tensioner release tool should be used from the top position to rotate the accessory drive belt tensioner clockwise until the generator pulley belt can be removed. You should begin by taking out the RH inner fender splash shield after which you must access the accessory drive belt underneath the car. The new belt needs placement on every pulley except the generator pulley then undergoes proper seating on all pulleys before completing assembly. Apply the belt tensioner release tool from the top to rotate the tensioner clockwise until you can fit the accessory drive belt. Reinstall the RH inner fender splash shield as the last step. Lubricating the accessory drive belt components including tensioner and pulleys must be strictly avoided since this action will damage the belt material and harm the tensioner damping mechanism.