FordParts
My Garage
My Account
Cart
OEM 2008 Ford Edge Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Radiators found
2008 Ford Edge Radiator Part Number: 7T4Z-8005-A
$224.08 MSRP: $334.12You Save: $110.04 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Radiator Assembly
- Replaces: 8G1Z-8005-B, 8A8Z-8005-A, 8G1Z-8005-A
- Base No.: 8005
- Item Weight: 14.90 Pounds
- Item Dimensions: 25.4 x 7.3 x 42.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-8005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Radiator Part Number: 7T4Z-8005-B
$198.71 MSRP: $309.52You Save: $110.81 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Radiator Assembly
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Base No.: 8005
- Item Weight: 13.20 Pounds
- Item Dimensions: 26.2 x 7.4 x 42.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-8005-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Radiator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Radiator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Radiator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Edge Radiator Parts Q&A
- Q: How to service the radiator on 2008 Ford Edge?A: Service of the radiator requires a cool-down of the cooling system. Service of the radiator starts with fan motor removal and shroud detachment followed by front bumper cover removal. First service the radiator by disconnecting upper and lower degas bottle hoses of the radiator followed by lower radiator hose removal. Fix the compressor-to-condenser discharge line bracket bolt using 7 Nm (62 lb-in) of torque when reinstalling. Place the radiator in front of the engine by removing radiator support tabs followed by separating the two pin-type retainers from the radiator system. First disconnect the two A/C condenser bolts from the radiator, tighten them to 10 Nm (89 lb-in) at installation time. Removing the radiator marks the end of this installation process followed by performing a reverse of earlier removal procedures to complete by filling then bleeding the cooling system.