My Garage
Cart

OEM 2008 Ford Escape Muffler

Exhaust Muffler
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Mufflers found

  • 2008 Ford Escape Muffler Diagram - 5L8Z-5230-BA
    View related parts

    2008 Ford Escape Muffler, Front Part Number: 5L8Z-5230-BA

    $454.45 MSRP: $597.61
    You Save: $143.16 (24%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Muffler Assembly - Front; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit
    • Position: Front
    • Base No.: 5230
    • Item Weight: 14.20 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5L8Z-5230-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Escape Submodels:
    • Hybrid, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
  • 2008 Ford Escape Muffler Diagram - 5L8Z-5A212-AC
    View related parts
    Product Specifications
    • Other Name: Silencer Assembly; Rear Exhaust Muffler; Direct-Fit Exhaust System Kit; Resonator and Pipe Assembly.; Muffler
    • Position: Rear
    • Replaces: 5L8Z-5A212-AB
    • Base No.: 5212
    • Item Weight: 14.30 Pounds
    • Item Dimensions: 49.9 x 10.1 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5L8Z-5A212-AC
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Escape Submodels:
    • Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
  • 2008 Ford Escape Muffler Diagram - 5L8Z-5A212-DA
    View related parts
    Product Specifications
    • Other Name: Silencer Assembly; Exhaust Muffler; Direct-Fit Exhaust System Kit; Resonator and Pipe Assembly.; Muffler
    • Base No.: 5212
    • Item Weight: 13.30 Pounds
    • Item Dimensions: 7.6 x 50.9 x 16.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5L8Z-5A212-DA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Escape Submodels:
    • Hybrid, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
  • 2008 Ford Escape Muffler - 6L8Z-5230-B
    2008 Ford Escape Muffler Diagram - 6L8Z-5230-B
    View related parts
    Product Specifications
    • Other Name: Muffler Assembly - Front; Exhaust Muffler, Front; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit
    • Position: Front
    • Replaces: 5L8Z-5230-CB
    • Base No.: 5230
    • Item Weight: 14.00 Pounds
    • Item Dimensions: 5.1 x 37.7 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L8Z-5230-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Escape Submodels:
    • Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Ford Escape Muffler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Muffler Parts Q&A

  • Q: How to service the muffler on 2008 Ford Escape?
    A: Service procedure for the muffler starts with positioning the vehicle in neutral gear and using a hoist. Loosen and throw out the two exhaust catalytic converter nuts before placing new ones and tightening them to 47 Nm (35 lb-ft). The installation of the U-bolt clamp assembly on the muffler should be completed after removal by tightening it to 47 Nm (35 lb-ft). You should discard the two resonator nuts but install new ones which require tightening to 47 Nm (35 lb-ft). Cut the exhaust catalytic converter hanger free before removing the combined exhaust catalytic converter and muffler assembly which you will dispose of the catalytic converter gasket. The removal of the muffler from the catalytic converter should be followed by the exact installation process with fresh gaskets effectively tightening all nuts.