How to service the hood latch on 2008 Ford Explorer?

The hood latch service requires marking its starting position while you unscrew the bolts until they reach 12 Nm (9 lb-ft) torque when you install them. The service procedure begins with disconnecting the hood latch release cable from the latch and then extracting the latch itself. You should reinstall the new latch by performing the reverse procedure while inspecting the latch adjustment and alignment for correct installation. After mounting the hood latch you should apply lubrication to protect its operation.

OEM 2008 Ford Explorer Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2008 Ford Explorer Lock, Front Part Number: 6L2Z-16700-AA
$56.46 MSRP: $82.18
You Save: $25.72 (32%)
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
- Position: Front
- Base No.: 16700
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.1 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Ford Explorer Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Hood Latch Parts Q&A

Q: How to service the hood latch on 2008 Ford Explorer?
A: The hood latch service requires marking its starting position while you unscrew the bolts until they reach 12 Nm (9 lb-ft) torque when you install them. The service procedure begins with disconnecting the hood latch release cable from the latch and then extracting the latch itself. You should reinstall the new latch by performing the reverse procedure while inspecting the latch adjustment and alignment for correct installation. After mounting the hood latch you should apply lubrication to protect its operation.