How to remove and replace the rear left parking brake cable on 2008 Ford Explorer Sport Trac?

The first step for replacing the rear left parking brake cable requires releasing its tension level. The vehicle in neutral position should rest on a hoist for further work. The wire form bolt must be removed before tightening it to 23 Nm torque (17 lb-ft) when reattaching the components. After bracket bolt removal the installer should tighten this bolt to 23 Nm (17 lb-ft) during the installation stage. The first step requires disconnecting the intermediate cable from its position at the cable equalizer followed by removing the front end of the left rear cable conduit from the frame bracket. Release the left parking brake lever to detach its cable then extract the cable. The new cable installation should begin with the opposite order of removal steps followed by testing the parking brake system for proper functions.

OEM 2008 Ford Explorer Sport Trac Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2008 Ford Explorer Sport Trac Front Cable
Part Number: 7L2Z-2853-A
$27.44 MSRP: $44.55
You Save: $17.11 (39%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 6L2Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 36.7 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Rear Cable, Driver Side
Part Number: 8L2Z-2A635-B
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 7L2Z-2A635-A, 7L2Z-2A635-C
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 1.6 x 1.5 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Rear Cable, Passenger Side
Part Number: 8A2Z-2A635-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 7A2Z-2A635-A, 7A2Z-2A635-B
- Base No.: 2A635
- Item Weight: 1.80 Pounds
- Item Dimensions: 1.5 x 1.5 x 44.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A2Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Ford Explorer Sport Trac Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sport Trac Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sport Trac Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Sport Trac Parking Brake Cable Parts Questions & Experts Answers

Q: How to remove and replace the rear left parking brake cable on 2008 Ford Explorer Sport Trac?
A: The first step for replacing the rear left parking brake cable requires releasing its tension level. The vehicle in neutral position should rest on a hoist for further work. The wire form bolt must be removed before tightening it to 23 Nm torque (17 lb-ft) when reattaching the components. After bracket bolt removal the installer should tighten this bolt to 23 Nm (17 lb-ft) during the installation stage. The first step requires disconnecting the intermediate cable from its position at the cable equalizer followed by removing the front end of the left rear cable conduit from the frame bracket. Release the left parking brake lever to detach its cable then extract the cable. The new cable installation should begin with the opposite order of removal steps followed by testing the parking brake system for proper functions.