How to remove and replace the rear left parking brake cable on 2009 Ford Explorer Sport Trac?

The first step for changing the rear left parking brake cable involves releasing the parking brake tension. Set neutral gear on the vehicle and hang it from the hoist. Start by removing the wire form bolt followed by the bracket bolt while tightening them to 23 Nm (17 lb-ft). The installation sequence begins with removing the intermediate cable from its position at the cable equalizer and proceeds with unfastening the front end of the left rear cable conduit at the frame bracket. After disconnecting the left parking brake cable from the parking brake lever you should remove the cable. When installing the new cable you must reverse the removal method while performing tests on the parking brake system to check its proper functioning.

OEM 2009 Ford Explorer Sport Trac Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2009 Ford Explorer Sport Trac Front Cable
Part Number: 7L2Z-2853-A
$27.44 MSRP: $44.55
You Save: $17.11 (39%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 6L2Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 36.7 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Sport Trac Rear Cable, Driver Side
Part Number: 8L2Z-2A635-B
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 7L2Z-2A635-A, 7L2Z-2A635-C
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 1.6 x 1.5 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Sport Trac Rear Cable, Passenger Side
Part Number: 8A2Z-2A635-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 7A2Z-2A635-A, 7A2Z-2A635-B
- Base No.: 2A635
- Item Weight: 1.80 Pounds
- Item Dimensions: 1.5 x 1.5 x 44.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A2Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Sport Trac Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Sport Trac Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Sport Trac Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Sport Trac Parking Brake Cable Parts Questions & Experts Answers

Q: How to remove and replace the rear left parking brake cable on 2009 Ford Explorer Sport Trac?
A: The first step for changing the rear left parking brake cable involves releasing the parking brake tension. Set neutral gear on the vehicle and hang it from the hoist. Start by removing the wire form bolt followed by the bracket bolt while tightening them to 23 Nm (17 lb-ft). The installation sequence begins with removing the intermediate cable from its position at the cable equalizer and proceeds with unfastening the front end of the left rear cable conduit at the frame bracket. After disconnecting the left parking brake cable from the parking brake lever you should remove the cable. When installing the new cable you must reverse the removal method while performing tests on the parking brake system to check its proper functioning.