FordParts
My Garage
My Account
Cart
OEM 2008 Ford F-150 Fuel Rail
Engine Fuel Rail- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Rails found
2008 Ford F-150 Fuel Rail Part Number: 5C3Z-9F792-DA
$408.60 MSRP: $600.00You Save: $191.40 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold Assembly - Fuel Supply
- Base No.: 9F792
- Item Weight: 3.60 Pounds
- Item Dimensions: 4.7 x 20.5 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-9F792-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-150 Fuel Rail Part Number: 3L1Z-9F792-BA
Product Specifications- Other Name: Manifold Assembly - Fuel Supply
- Manufacturer Note: Also service injector pressure sensor 9F972
- Base No.: 9F792
- Item Weight: 2.70 Pounds
- Item Dimensions: 4.3 x 4.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L1Z-9F792-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-150 Fuel Rail Part Number: 5L3Z-9F792-GA
Product Specifications- Other Name: Manifold Assembly - Fuel Supply
- Base No.: 9F792
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-9F792-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-150 Fuel Rail
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Fuel Rail available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Fuel Rail as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford F-150 Fuel Rail Parts Q&A
- Q: What safety precautions should be followed when servicing the fuel rail on 2008 Ford F-150?A: Safety measures are vital for fuel rail service because of present highly flammable gas mixture so eliminate all usage of open flames or smoking equipment. Before pulling away any fuel tubes or components from the system it is necessary to decrease pressure to stop accidental fuel sprays since the system retains pressure after engine shutdown. The service begins with removing the fuel rail spring lock coupling followed by upper intake manifold separation. The procedure starts by removing vacuum and electrical connectors from the fuel rail pressure sensor and continuing with the six fuel injector electrical connectors. Use a wire tie for detachment followed by removing the wiring harness retainers from around the fuel rail. Use a wrench to free the fuel rail with its injectors as one unit through its four mounting bolts while tightening these bolts to 10 Nm (89 lb-in) before reinstalling. After removing the old O-ring seals discard them and apply engine oil on new seals before rebuilding according to the installation procedure reverse order.