My Garage
Cart

OEM 2008 Ford F-250 Super Duty Hood Latch

Engine Hood Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

  • 2008 Ford F-250 Super Duty Hood Latch Diagram - 7C3Z-16700-A
    View related parts

    2008 Ford F-250 Super Duty Lock, Front Part Number: 7C3Z-16700-A

    $44.59 MSRP: $66.77
    You Save: $22.18 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
    • Position: Front
    • Base No.: 16700
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 6.3 x 5.3 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7C3Z-16700-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford F-250 Super Duty Submodels:
    • Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2008 Ford F-250 Super Duty Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Hood Latch Parts Q&A

  • Q: How to service and repair the hood latch on 2008 Ford F-250 Super Duty?
    A: The first step for servicing or repairing the hood latch requires making a marking of its position. The service begins with disconnecting the secondary release cable then disconnecting the cable conduit followed by separation of the cable itself. The installation requires tightening both hood latch bolts to 35 Nm (26 lb-ft) torque specification. You must turn the hood latch 180 degrees before separating its primary release cable B along with its cable conduit and cable. You should reinstall the hood latch through the opposite sequence of steps used for its removal.