How to Service and Repair a Fuel Level Sensor in a Steel Fuel Tank on 2008 Ford F-350 Super Duty?

Drain the tank. Clean the sensor flange, loosen six bolts and pull out the sensor without the float arm being bent. Take out, examine and clean the tank; wash in case very dirty. Check contact surfaces of gasket; do not change. Replace damaged parts. Install a new gasket, tighten the torque bolts to 10 Nm, and reassemble.

OEM 2008 Ford F-350 Super Duty Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Level Sensors found

View related parts
2008 Ford F-350 Super Duty Fuel Gauge Sending Unit Part Number: 8C3Z-9A299-A
$225.34 MSRP: $311.73
You Save: $86.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Base No.: 9A299
- Item Weight: 0.50 Pounds
- Item Dimensions: 12.5 x 4.6 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-9A299-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-350 Super Duty Fuel Pump Part Number: 8C3Z-9275-X
$307.40 MSRP: $500.00
You Save: $192.60 (39%)
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Fuel Gauge Sending Unit
- Replaces: 8C3Z-9275-P, 8C3Z-9275-Q, PS-272, PS-298, PS-422, 8C3Z-9275-D, 8C3Z-9A299-D, 8C3Z-9A299-J, 7C3Z-9275-D, 8C3Z-9A299-N, 8C3Z-9275-K, PS-367, PS-390, PS-417, PS-387
- Base No.: 9A299
- Item Weight: 3.70 Pounds
- Item Dimensions: 10.2 x 10.9 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-9275-X
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Fuel Pump Part Number: 8C3Z-9275-W
$314.10 MSRP: $510.91
You Save: $196.81 (39%)
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Fuel Gauge Sending Unit
- Replaces: 7C3Z-9275-B, 8C3Z-9275-J, 8C3Z-9A299-K, 8C3Z-9275-B, PS-423, 8C3Z-9A299-P, 8C3Z-9275-N, 8C3Z-9275-T, 8C3Z-9A299-E, PS-424, PS-368, PS-388
- Base No.: 9275
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.0 x 11.2 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-9275-W
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2008 Ford F-350 Super Duty Fuel Level Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Fuel Level Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Fuel Level Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Fuel Level Sensor Parts Q&A

Q: How to Service and Repair a Fuel Level Sensor in a Steel Fuel Tank on 2008 Ford F-350 Super Duty?
A: Drain the tank. Clean the sensor flange, loosen six bolts and pull out the sensor without the float arm being bent. Take out, examine and clean the tank; wash in case very dirty. Check contact surfaces of gasket; do not change. Replace damaged parts. Install a new gasket, tighten the torque bolts to 10 Nm, and reassemble.