Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Ford F-350 Super Duty Fuel Pump Driver Module

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

  • 2008 Ford F-350 Super Duty Fuel Pump Driver Module - 6C2Z-9D372-A
    2008 Ford F-350 Super Duty Fuel Pump Driver Module Diagram - 6C2Z-9D372-A
    View related parts

    2008 Ford F-350 Super Duty Control Module Part Number: 6C2Z-9D372-A

    $117.94 MSRP: $171.67
    You Save: $53.73 (32%)
    ADD TO CART
    Product Specifications
    • Other Name: Module - Engine Fuel; Fuel Pump Driver Module; Fuel Pump Controller; Module
    • Replaces: 6L1Z-9D372-AD, 4C2Z-9D372-BA, 6L1Z-9D372-AA
    • Base No.: 9D372
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 8.3 x 6.2 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C2Z-9D372-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford F-350 Super Duty Submodels:
    • Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2008 Ford F-350 Super Duty Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Fuel Pump Driver Module Parts Q&A

  • Q: Where is the fuel pump driver module (FPDM) located and How to access it on 2008 Ford F-350 Super Duty?
    A: The fuel pump driver module (FPDM) exists on the left-hand side rear section where the spare tire rests above it. The key for a spare tire lock should be located inside the glove compartment. Open access to the FPDM using the drive end of the jack handle equipped with a spare tire carrier key inserted through the opening beside the license plate. Lower and take out the spare tire assembly to reach the component. Position the vehicle with neutral gear selection on a hoist mechanism after disconnecting the FPDM electrical connector. Restoration of the FPDM begins with removing its nuts where you must tighten them to 10 Nm (89 lb-in) before assembly. The FPDM removal process should be reversed during the installation procedure.

Related 2008 Ford F-350 Super Duty Parts

Alternate Year Models

+
2009 Ford F-350 Super Duty Fuel Pump Driver Module