How to access and replace the Fuel Pump Driver Module (FPDM) on 2009 Ford F-350 Super Duty?

The Fuel Pump Driver Module (FPDM) finds its position on the left-hand side of the vehicle behind the rear wheel. Owners must first unlock the spare tire storage if secured with a lock. The storage key can then be accessed in the glove compartment. Direct the jack handle drive end with spare tire carrier key towards the space next to the license plate to get access to the Fuel Pump Driver Module. The vehicle must rest on a hoist at neutral position before disconnecting the electrical connector and removing the two nuts from the Fuel Pump Driver Module. Install new nuts while tightening to 10 Nm (89 lb-in). The installation process ends by removing the Fuel Pump Driver Module and installing a new unit through the opposite removal steps.

OEM 2009 Ford F-350 Super Duty Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
2009 Ford F-350 Super Duty Control Module Part Number: 6C2Z-9D372-A
$117.94 MSRP: $171.67
You Save: $53.73 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Fuel; Fuel Pump Driver Module; Fuel Pump Controller; Module
- Replaces: 6L1Z-9D372-AD, 4C2Z-9D372-BA, 6L1Z-9D372-AA
- Base No.: 9D372
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.3 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-9D372-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2009 Ford F-350 Super Duty Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-350 Super Duty Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-350 Super Duty Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-350 Super Duty Fuel Pump Driver Module Parts Q&A

Q: How to access and replace the Fuel Pump Driver Module (FPDM) on 2009 Ford F-350 Super Duty?
A: The Fuel Pump Driver Module (FPDM) finds its position on the left-hand side of the vehicle behind the rear wheel. Owners must first unlock the spare tire storage if secured with a lock. The storage key can then be accessed in the glove compartment. Direct the jack handle drive end with spare tire carrier key towards the space next to the license plate to get access to the Fuel Pump Driver Module. The vehicle must rest on a hoist at neutral position before disconnecting the electrical connector and removing the two nuts from the Fuel Pump Driver Module. Install new nuts while tightening to 10 Nm (89 lb-in). The installation process ends by removing the Fuel Pump Driver Module and installing a new unit through the opposite removal steps.