How to service and repair the turn signal switch on 2008 Ford F-350 Super Duty?

Start the turn signal switch service and repair by first taking off the steering column opening trim together with the tilt lever dust boot. After removing the screw maintaining the tilt lever position the fastener until it reaches 6 Nm (53 inch lbs.) during replacement. First uninstall the electric connector of the multi-function switch before removing the three screws securing the upper and lower steering column shrouds. Tighten the two screws which secure the multi-function switch to 1 Nm (9 inch lbs.) when replacing it. To finish the installation follow the reversal of the removal steps in the correct order.

OEM 2008 Ford F-350 Super Duty Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2008 Ford F-350 Super Duty Multifunction Switch
Part Number: 7C3Z-13K359-AA
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch
- Manufacturer Note: BLACK
- Base No.: 13K359
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.3 x 4.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL

2008 Ford F-350 Super Duty Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Turn Signal Switch Parts Questions & Experts Answers

Q: How to service and repair the turn signal switch on 2008 Ford F-350 Super Duty?
A: Start the turn signal switch service and repair by first taking off the steering column opening trim together with the tilt lever dust boot. After removing the screw maintaining the tilt lever position the fastener until it reaches 6 Nm (53 inch lbs.) during replacement. First uninstall the electric connector of the multi-function switch before removing the three screws securing the upper and lower steering column shrouds. Tighten the two screws which secure the multi-function switch to 1 Nm (9 inch lbs.) when replacing it. To finish the installation follow the reversal of the removal steps in the correct order.