Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
Replaces: 8C3Z-8501-B, PW-482
Condition: New
Fitment Type: Direct Replacement
SKU: 8C3Z-8501-C
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following 2008 Ford F-350 Super Duty Submodels:
Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
2008 Ford F-350 Super Duty Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford F-350 Super Duty Water Pump Parts Q&A
Q: How to Service and Repair the Water Pump on Gasoline Engines on 2008 Ford F-350 Super Duty?
A: Start coolant pump servicing and repairing process on gasoline engines by draining the engine cooling system. The first step requires removal of the cooling fan followed by bolt loosening on the four coolant pump pulley bolts which need re-tightening to 25 Nm (18 lb-ft) upon refitting. The accessory drive belt can be removed by rotating the tensioner clockwise from the coolant pump pulley. After that you should remove the four bolts that hold the coolant pump pulley in place. Untighten the four bolts which hold the coolant pump before discarding the O-ring seal. At the stage of new coolant pump assembly consumers should apply metal surface prep as detailed in the packaging instructions before installation of a new O-ring seal which must receive engine coolant lubrication for installation. Reverse the tooling to put on the four install bolts and tighten them to 25 Nm (18 lb-ft) following the noted specification.