How to Service and Repair the Front Brake Line Flexible Hose on 2008 Ford Focus?

You should begin front brake flexible hose servicing and repair operations by using brake fluid which exceeds manufacturer specifications and preventing draining of prior fluid to avoid system contamination. Customers must read the warnings on product labels and obtain urgent medical assistance through 1-800-959-3673 especially for USA and Canadian Ford/Motorcraft products. Water must be used to wash off brake fluid immediately when it comes into contact with painted or plastic surfaces. At the beginning replace the brake caliper flow bolt yet discard both copper washers while tightening the new bolt to 48 Nm (35 lb-ft) torque when finished. The brake tube fitting requires removal from the brake flexible hose while you should tighten the connection to 15 Nm (11 lb-ft) during reinstallation. The brake flexible hose along with its retaining clips must be removed first. The brake caliper installation can be finalized by following removal steps backward. Then add new copper washers before performing a brake caliper bleed to achieve proper operation.

OEM 2008 Ford Focus Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2008 Ford Focus Brake Tube, Driver Side Part Number: 8S4Z-2268-C
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 8S4Z-2267-A
- Base No.: 2268B
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.3 x 3.1 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-2268-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Brake Tube, Passenger Side Part Number: 8S4Z-2267-B
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 8S4Z-2268-A
- Base No.: 2268B
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.6 x 5.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-2267-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Flex Hose, Front Passenger Side Part Number: AS4Z-2078-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 8S4Z-2078-B
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 18.5 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AS4Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Flex Hose, Front Driver Side Part Number: AS4Z-2078-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 8S4Z-2078-A
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 18.4 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AS4Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Flex Hose, Rear Part Number: AS4Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear
- Replaces: 8S4Z-2282-A, 8S4Z-2282-B
- Base No.: 2282
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.4 x 7.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: AS4Z-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2008 Ford Focus Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus Brake Line Parts Q&A

Q: How to Service and Repair the Front Brake Line Flexible Hose on 2008 Ford Focus?
A: You should begin front brake flexible hose servicing and repair operations by using brake fluid which exceeds manufacturer specifications and preventing draining of prior fluid to avoid system contamination. Customers must read the warnings on product labels and obtain urgent medical assistance through 1-800-959-3673 especially for USA and Canadian Ford/Motorcraft products. Water must be used to wash off brake fluid immediately when it comes into contact with painted or plastic surfaces. At the beginning replace the brake caliper flow bolt yet discard both copper washers while tightening the new bolt to 48 Nm (35 lb-ft) torque when finished. The brake tube fitting requires removal from the brake flexible hose while you should tighten the connection to 15 Nm (11 lb-ft) during reinstallation. The brake flexible hose along with its retaining clips must be removed first. The brake caliper installation can be finalized by following removal steps backward. Then add new copper washers before performing a brake caliper bleed to achieve proper operation.