How to Service and Repair the Brake Line on Ford Focus?

The service and repair of brake flexible hoses must use only new brake fluid of specified manufacturer quality which should be kept separate from drained fluid to protect system integrity. Read all production warnings on the product label carefully together with consulting medical experts for urgent situations. Brake fluid that leaks onto painted or plastic materials demands a prompt water wash to stop any harm from occurring. The brake caliper flow bolt removal marks the start of the procedure along with discarding both copper washers while tightening the new bolt to 48 Nm (35 lb-ft) during assembly. You should disconnect the brake tube fitting from the brake flexible hose while tightening it to 15 Nm (133 lb-in) during reinstallation. The brake flexible hose needs removal along with the two retaining clips. The installation process ends by performing both the removal reversal steps along with putting in new copper washers then bleeding the brake caliper until it works properly.

OEM Ford Focus Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Brake Lines found

View related parts
Ford Focus Flex Hose Part Number: AV6Z-2282-A
$23.24 MSRP: $36.91
You Save: $13.67 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear; Brake Hydraulic Line, Rear; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Flex Hose, Front Part Number: CV6Z-2078-A
$34.01 MSRP: $54.00
You Save: $19.99 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hydraulic Line, Front; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: RH/LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Flex Hose Part Number: CP9Z-2282-A
$32.24 MSRP: $51.20
You Save: $18.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Line, Rear; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Rear Part Number: YS4Z-2282-DA
$4.34 MSRP: $6.00
You Save: $1.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Manufacturer Note: Rear (Secondary Line) , 411mm, Male/Female fittings, Forward end connects to steel tube, rearward ends connects directly to caliper , Rear Disc Brakes
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Focus | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Brake Tube, Rear Passenger Side Part Number: CV6Z-2265-A
$27.61 MSRP: $42.73
You Save: $15.12 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hydraulic Line, Rear Right; Brake Hose; Brake Line
- Manufacturer Note: RH Only
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Rear Passenger Side Part Number: YS4Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Brake Tube, Driver Side Part Number: 8S4Z-2268-C
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 8S4Z-2267-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Brake Tube, Passenger Side Part Number: 8S4Z-2267-B
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 8S4Z-2268-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Flex Hose, Front Passenger Side Part Number: 6S4Z-2078-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front, Front Left, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Rear Driver Side Part Number: 5S4Z-2282-BA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Front Driver Side Part Number: 1S4Z-2078-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: YS4Z-2078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Front Part Number: G1FZ-2078-A
$55.92 MSRP: $88.80
You Save: $32.88 (38%)
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Rear Part Number: AS4Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear
- Replaces: 8S4Z-2282-A, 8S4Z-2282-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Flex Hose, Front Passenger Side Part Number: AS4Z-2078-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 8S4Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Flex Hose, Front Driver Side Part Number: AS4Z-2078-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 8S4Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Flex Hose, Rear Passenger Side Part Number: 98AZ-2282-CA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Flex Hose, Rear Driver Side Part Number: 5S4Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

Ford Focus Brake Line

OEM Brake Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Line with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Focus Brake Line is quite an essential item of the Ford Focus hydraulic braking system and its primary role is to deliver the brake fluid from the master cylinder to the brake caliper pistons. The Ford Focus Brake Line is very important when it comes to safety and efficiency of the car, especially during operation and therefore the component is very vital and is also very reliable and very efficient. This Brake Line is intended for Ford Focus cars and its compatibility with different models enables the car's brake line to endure the harsh conditions of usage and at the same time retain the car's braking mechanism in its premier stead. Understanding the changes that have been made to the Ford Focus over the production years means knowledge of the various Brake Line materials that were used; such as metal and rubber both of which are not without their merits and demerits. However, for those who wants more performance, it is advised to get the replacement of the stock rubber brake hoses with braided stainless steel brake lines mainly for the better feel and response of the brake pedal and definitely it gives much better feel for the driver. Apart from adding to the safety of the Ford Focus vehicle, the brake line is useful to ensure that the drivers get a reliable brake function no matter the conditions surrounding the automobile. There are several crucial aspects which make the Ford Focus Brake Line noteworthy in the automotive market and which reveal the firm's adherence to the principles of quality and innovation. It is only necessary to note the increased popularity of the Ford Focus, the constant development of its new versions and, therefore, the relevance of the Brake Line as a means of ensuring the car's reliability and driving performance.

Ford Focus Brake Line Parts and Q&A

Brake Tube, Driver Side
8S4Z-2268-C
Q: How to Service and Repair the Brake Line on Ford Focus?
A:
The service and repair of brake flexible hoses must use only new brake fluid of specified manufacturer quality which should be kept separate from drained fluid to protect system integrity. Read all production warnings on the product label carefully together with consulting medical experts for urgent situations. Brake fluid that leaks onto painted or plastic materials demands a prompt water wash to stop any harm from occurring. The Brake Caliper flow bolt removal marks the start of the procedure along with discarding both copper washers while tightening the new bolt to 48 Nm (35 lb-ft) during assembly. You should disconnect the brake tube fitting from the brake flexible hose while tightening it to 15 Nm (133 lb-in) during reinstallation. The brake flexible hose needs removal along with the two retaining clips. The installation process ends by performing both the removal reversal steps along with putting in new copper washers then bleeding the brake caliper until it works properly.