How to service and repair the Driver Door Body Control Module on 2008 Ford Fusion?

To fix the Driver Door Module (DDM), load its settings to a scan tool, detach the driver door trim panel, and two nuts, and tighten them to 3 Nm when re-fitting. Unplug the DDM, repeat the installation process and load the settings to the new module without causing any damage through statical disturbance.

OEM 2008 Ford Fusion Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Body Control Modules found

View related parts
2008 Ford Fusion Control Module Part Number: 8E5Z-15604-B
Product Specifications
- Other Name: Kit - Alarm/Keyless Lock System; Anti-Theft Alarm Control Unit; Body Control Module; Receiver; Module
- Item Weight: 3.30 Pounds
- Item Dimensions: 15.8 x 10.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-15604-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Fusion Control Module Part Number: 8E5Z-15604-A
Product Specifications
- Other Name: Kit - Alarm/Keyless Lock System; Anti-Theft Alarm Control Unit; Body Control Module; Receiver; Module
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-15604-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Ford Fusion Body Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Body Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Body Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Body Control Module Parts Q&A

Q: How to service and repair the Driver Door Body Control Module on 2008 Ford Fusion?
A: To fix the Driver Door Module (DDM), load its settings to a scan tool, detach the driver door trim panel, and two nuts, and tighten them to 3 Nm when re-fitting. Unplug the DDM, repeat the installation process and load the settings to the new module without causing any damage through statical disturbance.