How to service the brake light switch correctly on 2008 Ford Fusion?

Service the brake light switch by keeping the brake pedal at rest throughout installation and avoid applying pressure to it nor pulling or moving it until the completion of stoplamp switch installation to prevent wrong adjustment and breakage. Start by pressing down on the switch plunger before turning the bracket because letting the plunger extend during removal will create damage to the switch. A clockwise turn of 1/8 turn on the stoplamp switch will allow you to pull it out from the bracket after disconnecting the electrical connector. Installation requires a reversal of the uninstallation steps with correct attachment of the booster push rod to the brake pedal.

OEM 2008 Ford Fusion Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Ford Fusion Stoplamp Switch Part Number: 7E5Z-13480-A
$39.71 MSRP: $63.05
You Save: $23.34 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: 6E5Z-13480-A
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-13480-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Ford Fusion Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Brake Light Switch Parts Q&A

Q: How to service the brake light switch correctly on 2008 Ford Fusion?
A: Service the brake light switch by keeping the brake pedal at rest throughout installation and avoid applying pressure to it nor pulling or moving it until the completion of stoplamp switch installation to prevent wrong adjustment and breakage. Start by pressing down on the switch plunger before turning the bracket because letting the plunger extend during removal will create damage to the switch. A clockwise turn of 1/8 turn on the stoplamp switch will allow you to pull it out from the bracket after disconnecting the electrical connector. Installation requires a reversal of the uninstallation steps with correct attachment of the booster push rod to the brake pedal.