How to service the Wiper Pivot and mounting arm on 2008 Ford Fusion?

To remove wiper mounting arm, pivot shaft To remove the wiper mounting arm and the pivot shaft, remove the top cowl panel grille and disconnect the electrical connector of the wiper motor. Next remove the assembly and the two bolts. To install, screw the bolts up to 5 Nm (44 lb-in) and undo the steps of removal.

OEM 2008 Ford Fusion Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Pivot found

View related parts
2008 Ford Fusion Wiper Transmission Part Number: 6E5Z-17566-A
$80.98 MSRP: $112.02
You Save: $31.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Linkage Assembly - Wiper; Windshield Wiper Linkage; Wiper Linkage
- Base No.: 17566
- Item Weight: 4.50 Pounds
- Item Dimensions: 8.2 x 7.2 x 30.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-17566-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS

2008 Ford Fusion Wiper Pivot

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Wiper Pivot available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Wiper Pivot as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Wiper Pivot Parts Q&A

Q: How to service the Wiper Pivot and mounting arm on 2008 Ford Fusion?
A: To remove wiper mounting arm, pivot shaft To remove the wiper mounting arm and the pivot shaft, remove the top cowl panel grille and disconnect the electrical connector of the wiper motor. Next remove the assembly and the two bolts. To install, screw the bolts up to 5 Nm (44 lb-in) and undo the steps of removal.