My Garage
Cart

OEM 2008 Ford Taurus Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2008 Ford Taurus Thermostat - 1X4Z-8575-B
    2008 Ford Taurus Thermostat Diagram - 1X4Z-8575-B
    View related parts

    2008 Ford Taurus Thermostat Part Number: 1X4Z-8575-B

    $15.63 MSRP: $24.18
    You Save: $8.55 (36%)
    Product Specifications
    • Other Name: Thermostat Assembly; Engine Coolant Thermostat
    • Replaces: 1X4Z-8575-A, 1X4Z-8575-FA, RT-1228, RT-1172
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1X4Z-8575-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2008 Ford Taurus Submodels:
    • Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS

2008 Ford Taurus Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Taurus Thermostat Parts Q&A

  • Q: How to service the thermostat on 2008 Ford Taurus?
    A: Service procedures for the thermostat begin with draining the cooling system. First disconnect the air cleaner assembly and outlet pipe after removing the two bolts from the thermostat housing cover that should be placed to the side. The housing cover installation should end at 10 Nm (89 lb-in). The service process includes extracting the O-ring seal and thermostat followed by careful cleaning then inspection of the O-ring seal so you can decide to replace it with a new one. Engine coolant requires cleaning before you can apply it as lubrication during the installation steps that reverse the thermostat O-ring removal process. The cooling system completion requires you to perform fluid filling and bleeding steps.