FordParts
My Garage
My Account
Cart
OEM 2008 Ford Taurus X A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Expansion Valves found
2008 Ford Taurus X Expansion Valve, Front Part Number: 8G1Z-19849-A
$21.25 MSRP: $33.75You Save: $12.50 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Front; A/C Expansion Valve
- Manufacturer Note: Includes Attaching Hardware
- Position: Front
- Replaces: 5F9Z-19849-CA
- Base No.: 19849
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus X Expansion Valve, Rear Part Number: 5F9Z-19849-BB
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Rear; A/C Expansion Valve
- Position: Rear
- Replaces: 5F9Z-19849-BA
- Base No.: 19849
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.0 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-19849-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus X A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus X A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus X A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Taurus X A/C Expansion Valve Parts Q&A
- Q: How to Service the A/C Expansion Valve on 2008 Ford Taurus X?A: The recovery of refrigerant should be the first step before servicing the thermostatic expansion valve (TXV). Begin by removing the four cross vehicle beam nuts before taking off the beam while tightening the beam installation to 30 Nm (22 lb-ft). The installation of the new TXV manifold bolt requires a bolt torque of 8 Nm (71 lb-in) while you discard the O-ring seals. Follow by unscrewing the two TXV bolts then re-torque these components to 8 Nm (71 lb-in) during reinstallation. To install the component reverse the removal steps while using fresh seals and apply the correct amount of clean PAG oil to the refrigerant system. The last procedure includes evacuation and leak testing followed by refrigerant charging of the system.