How to service the heater core on 2008 Ford Taurus X?

Service of the heater core should start with a pressure leak test that determines if a leak exists. Start by taking out the heater core installation while also removing the evaporator core housing then eliminating the dash panel seal. The heater core tube support bracket can be accessed by removing three screws which then makes it possible to remove the bracket itself. You should use a wrench to take out the ten screws found on the plenum chamber so you can disconnect the heater core from the evaporator housing. Conclusion comes with heater core removal. The reverse installation process of the heater core follows the steps previously used for removal.

OEM 2008 Ford Taurus X Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Heater Cores found

View related parts
2008 Ford Taurus X Heater Core, Front
Part Number: AA5Z-18476-B
Product Specifications
- Other Name: Radiator And Seal Assembly - Heater; HVAC Heater Core, Front; HVAC Heater Core
- Manufacturer Note: Includes Seal
- Position: Front
- Replaces: HC-53, AA5Z-18476-A, 8G1Z-18476-A
- Base No.: 18476
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.0 x 14.5 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AA5Z-18476-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Taurus X Heater Core, Rear
Part Number: 5F9Z-18476-EA
Product Specifications
- Other Name: Radiator And Seal Assembly; HVAC Heater Core, Rear; Radiator Assembly; Core Assembly - Heater
- Manufacturer Note: Includes Seal
- Position: Rear
- Base No.: 18476
- Item Weight: 2.10 Pounds
- Item Dimensions: 12.0 x 2.6 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-18476-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

2008 Ford Taurus X Heater Core

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus X Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus X Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Taurus X Heater Core Parts Questions & Experts Answers

Q: How to service the heater core on 2008 Ford Taurus X?
A: Service of the heater core should start with a pressure leak test that determines if a leak exists. Start by taking out the heater core installation while also removing the evaporator core housing then eliminating the dash panel seal. The heater core tube support bracket can be accessed by removing three screws which then makes it possible to remove the bracket itself. You should use a wrench to take out the ten screws found on the plenum chamber so you can disconnect the heater core from the evaporator housing. Conclusion comes with heater core removal. The reverse installation process of the heater core follows the steps previously used for removal.