FordParts
My Garage
My Account
Cart
OEM 2008 Ford Taurus X Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator found
2008 Ford Taurus X Alternator Part Number: DG1Z-10346-F
$321.32 MSRP: $530.91You Save: $209.59 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Alternator Assembly; Reman Alternator
- Manufacturer Note: 175 AMP
- Replaces: 8A4Z-10346-A, GL-933, DG1Z-10346-A, GL-8664
- Base No.: 10346
- Item Weight: 17.60 Pounds
- Item Dimensions: 13.3 x 10.0 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG1Z-10346-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus X Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus X Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus X Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Taurus X Alternator Parts Q&A
- Q: How to service the alternator on 2008 Ford Taurus X?A: Start the alternator servicing process by unwiring the battery. The first step involves removing the generator B+ nut and terminal but proceed with tightening this component to 12 Nm (9 lb-ft) when reinstalling it. The generator electrical connector should be disconnected while placing the engine wiring harness to the side. The upper radiator hose should be set aside while removing its cradle. The wire harness across the top of the radiator requires separation from its five pin-type retainers before placement to the side. Use a tool to move the accessory drive belt tensioner in order to shift the belt out of instalment path. The upper generator stud requires removal along with its nut but both components get torqued at 8 Nm (71 lb-in) when reinstalling. The technician should install the generator bolt loosely at first before tightening it to 47 Nm (35 lb-ft) when reinstalling it. To complete the process replace the generator in the opposite order of removal.