How to service and repair the turn signal switch on 2008 Lincoln MKX?

Service of the turn signal switch: To remove the upper steering column shroud, press the sides and lift the shroud. Next, unscrew the multi-function switch, screws in the lower shroud, release the tilt lever and remove it. Undo these steps on reinstallation.

OEM 2008 Lincoln MKX Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2008 Lincoln MKX Turn Signal Switch Part Number: 8T4Z-13K359-AA
$144.76 MSRP: $238.18
You Save: $93.42 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch; Multiplex Switch
- Manufacturer Note: BLACK
- Replaces: 7T4Z-13K359-AB, 7T4Z-13K359-AA
- Base No.: 13K359
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.4 x 3.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS

2008 Lincoln MKX Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKX Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKX Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKX Turn Signal Switch Parts Q&A

Q: How to service and repair the turn signal switch on 2008 Lincoln MKX?
A: Service of the turn signal switch: To remove the upper steering column shroud, press the sides and lift the shroud. Next, unscrew the multi-function switch, screws in the lower shroud, release the tilt lever and remove it. Undo these steps on reinstallation.