How to remove and replace the front bumper cover on 2008 Lincoln MKZ?

Start the procedure of front bumper cover replacement for Ford Fusion and its equivalents by placing the vehicle on a hoist with the transmission in the neutral position. The first step entails removing six pin-type retainers placed at three points each side followed by eight fender splash shield screws installed as four points on each side. After that step remove 4 air deflector bolts from their places. You should remove the 5 bolts situated at the top of the radiator grille on the MKZ. Eliminate the 2 bolts and 2 pin-type retainers from the Fusion and Milan by unfastening these components on top of the radiator grille. The installation demands to disconnect the electrical components when fog lamps exist in the vehicle. The final step involves removing the front bumper cover before proceeding with installation by performing the opposite steps of removal.

OEM 2008 Lincoln MKZ Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2008 Lincoln MKZ Impact Bar, Front Part Number: 6E5Z-17757-AA
$287.57 MSRP: $422.28
You Save: $134.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Base No.: 17757
- Item Weight: 21.00 Pounds
- Item Dimensions: 44.5 x 25.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2008 Lincoln MKZ Impact Bar, Rear Part Number: 6E5Z-17906-AA
$204.83 MSRP: $298.15
You Save: $93.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 21.40 Pounds
- Item Dimensions: 10.0 x 9.8 x 46.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2008 Lincoln MKZ Bumper Cover Part Number: 8H6Z-17K835-DAPTM
$333.03 MSRP: $489.03
You Save: $156.00 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 6H6Z-17K835-BBPTM
- Base No.: 17K835
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8H6Z-17K835-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2008 Lincoln MKZ Bumper Cover Part Number: 6H6Z-17D957-BAPTM
Product Specifications
- Other Name: Cover
- Base No.: 17D957
- Item Weight: 12.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6H6Z-17D957-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS

2008 Lincoln MKZ Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKZ Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2008 Lincoln MKZ?
A: Start the procedure of front bumper cover replacement for Ford Fusion and its equivalents by placing the vehicle on a hoist with the transmission in the neutral position. The first step entails removing six pin-type retainers placed at three points each side followed by eight fender splash shield screws installed as four points on each side. After that step remove 4 air deflector bolts from their places. You should remove the 5 bolts situated at the top of the radiator grille on the MKZ. Eliminate the 2 bolts and 2 pin-type retainers from the Fusion and Milan by unfastening these components on top of the radiator grille. The installation demands to disconnect the electrical components when fog lamps exist in the vehicle. The final step involves removing the front bumper cover before proceeding with installation by performing the opposite steps of removal.