Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 6E5Z-17906-AA
Impact Bar, Rear

2006-2009 Ford 6E5Z17906AA

Customer Questions & Expert Answers (9)
Ford 6E5Z-17906-AA Impact Bar, Rear
  • Part Description
    Bumper Assembly - Rear; Bumper Impact Bar, Rear
  • Base No.
    17906
  • Position
    Rear
  • Manufacturer
    Ford
Make sure this part fits
$204.83 MSRP: $298.15
You Save: $93.32 (32%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 6E5Z-17906-AA Impact Bar, Rear is Ref No. 10 in the diagram below

    2008 Mercury Milan Impact Bar, Rear Diagram for 6E5Z-17906-AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 6E5Z-17906-AA

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2009 Ford FusionS, SE, SEL4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
    2007-2009 Lincoln MKZBase6 Cyl 3.5 L GAS
    2006 Lincoln ZephyrBase6 Cyl 3.0 L GAS
    2006-2009 Mercury MilanBase, Premier4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 6E5Z-17906-AA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6E5Z-17906-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to remove and replace the rear bumper cover on Lincoln MKZ? Posted by Customer
    A:
    The process of replacing a rear bumper cover starts with lamp assembly unmounting. Start by detaching the six pin-type retainers from the rear splash shield that are spread across both sides before moving on to the two lower pin-type retainers of the bumper cover. The rear bumper cover installation begins after removing each of the two pin-type retainers and two bolts situated at its upper portion. Starting from the side of the bumper, extract one screw located at the top section. A parking aid system requires the electrical connector to be disconnected along with the removal of the license plate lamp electrical connector from Milan and MKZ vehicles. Install the new cover by reversing the step of removing the rear bumper.
    Posted by FordPartsDeal Specialist
    Q:
    How to remove and replace the rear bumper cover on Mercury Milan? Posted by Customer
    A:
    The rear lamp assembly needs removal as the first step for bumper cover replacement. First detach the six pin-type retainers from the rear splash shield and afterward disengage the two pin-type retainers from the lower rear bumper cover. Then, remove the two pins and two screws situated at the top of the bumper cover. Begin by removing the two bolts together with two pin-type retainers from the top area of the rear bumper cover. These components are replaced by the two upper bumper cover screws which you will find on each side of the vehicle. The installation and removal process for Milan and MKZ models demands detachment of the license plate lamp electrical connector as well as the optional parking aid system electrical connector. End the process of installation by reversing all previous removal steps for the new rear bumper cover.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the rear bumper cover on Lincoln Zephyr? Posted by Customer
    A:
    You should start the rear bumper cover servicing process by taking out the rear lamp assembly. The removal sequence starts with taking out three pin-type retainers on each side from the rear splash shield then proceeding with the removal of the two pin-type retainers from the lower rear bumper cover. You need to detach two bolts and two pin-type retainers which are positioned at the top of the rear bumper cover. Disconnect the electrical connector of the parking aid system when the vehicle has such functionality. The rear bumper cover becomes available for removal once completion of all these steps. The removal process should be used to install the new bumper cover.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done if the car is equipped with a parking aid system for the 2007 Ford Fusion? Posted by Customer
    A:
    Disconnect the electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What is the final step in the removal process for the 2008 Ford Fusion? Posted by Customer
    A:
    Remove the front bumper cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    How do you install the front bumper cover after removal for the 2007 Lincoln MKZ? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What is the first step to remove and replace the front bumper cover for the 2009 Lincoln MKZ? Posted by Customer
    A:
    Position the vehicle on a hoist with it in NEUTRAL.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What screws need to be removed after the pin-type retainers for the 2006 Mercury Milan? Posted by Customer
    A:
    Remove the 8 fender splash shield screws, consisting of 4 on each side.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Impact Bar, Rear 6E5Z-17906-AA Designed for Proper Fit and Performance

The Ford part 6E5Z-17906-AA Impact Bar, Rear as a genuine Ford Bumper component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6E5Z-17906-AA Impact Bar, Rear is used with Ford Fusion vehicles and Mercury Milan models and Lincoln MKZ, Zephyr models. The original Ford part will bear the manufacturer part number: 6E5Z-17906-AA and where it is made at Ford. It has been specifically developed to fit the Rear and has the code: 17906.
This component has dimensions of 10.0 x 9.8 x 46.9 inches and its weight is approximately 21.40 Pounds. The part 6E5Z17906AA is available in New condition while meeting the standards of the product rating. The Bumper Assembly - Rear; Bumper Impact Bar, Rear belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6E5Z-17906-AA can be vital. The inventory reference for this item is SKU: 6E5Z-17906-AA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.