How to service the front ABS sensor on 2008 Lincoln Navigator?

The service of front ABS sensors involves turning off the air suspension switch when present followed by tire and wheel removal. First, remove the ABS sensor electrical connector while disconnecting its harness retainer bolt before detaching the retainers that need to be torqued at 12 Nm (9 lb-ft) when reinstalling. Secure all items safely while following these steps: Remove the braking caliper from the brake hose to prevent damage, then loosen both anchor bolts securing it before setting aside caliper pads and anchor plates together with the caliper, which can be supported by wire from mechanics. The caliper needs to be installed tightly with a torque force of 200 Nm (148 lb-ft). After taking off the brake disc, the installer should replace the front ABS sensor bolt first before adding the sensor using 18 Nm (13 lb-ft) torque. The final step to install the system requires following the steps in reverse order of removal.

OEM 2008 Lincoln Navigator ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2008 Lincoln Navigator ABS Sensor, Rear Driver Side
Part Number: 7L1Z-2C190-E
$89.04 MSRP: $146.51
You Save: $57.47 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Rear Speed Sensor
- Position: Rear Driver Side
- Replaces: 7L1Z-2C190-D, 7L1Z-2C204-D
- Base No.: 2C190
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 2.6 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C190-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Navigator ABS Sensor, Front Passenger Side
Part Number: 7L1Z-2C204-F
$76.75 MSRP: $126.29
You Save: $49.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 7L1Z-2C204-B
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C204-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Lincoln Navigator ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Navigator ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Navigator ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Navigator ABS Sensor Parts Questions & Experts Answers

Q: How to service the front ABS sensor on 2008 Lincoln Navigator?
A: The service of front ABS sensors involves turning off the air suspension switch when present followed by tire and wheel removal. First, remove the ABS sensor electrical connector while disconnecting its harness retainer bolt before detaching the retainers that need to be torqued at 12 Nm (9 lb-ft) when reinstalling. Secure all items safely while following these steps: Remove the braking caliper from the brake hose to prevent damage, then loosen both anchor bolts securing it before setting aside caliper pads and anchor plates together with the caliper, which can be supported by wire from mechanics. The caliper needs to be installed tightly with a torque force of 200 Nm (148 lb-ft). After taking off the brake disc, the installer should replace the front ABS sensor bolt first before adding the sensor using 18 Nm (13 lb-ft) torque. The final step to install the system requires following the steps in reverse order of removal.