My Garage
Cart

OEM 2008 Lincoln Navigator Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2008 Lincoln Navigator Thermostat Diagram - 7L3Z-8575-E
    View related parts

    2008 Lincoln Navigator Thermostat Part Number: 7L3Z-8575-E

    $20.68 MSRP: $32.00
    You Save: $11.32 (36%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Thermostat Assembly; Engine Coolant Thermostat; Thermostat, Coolant
    • Replaces: 7L3Z-8575-D, 7L3Z-8575-B, AL3Z-8575-B, RT-1196, RT-1230, 3L3Z-8575-AA, 3L3Z-8575-AC, 7L3Z-8575-C, AL3Z-8575-A, RT-1204, RT-1234, RT-1178, RT-1229, RT-1165
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7L3Z-8575-E
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2008 Lincoln Navigator Submodels:
    • Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Lincoln Navigator Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Navigator Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Navigator Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Navigator Thermostat Parts Q&A

  • Q: How to service the thermostat and thermostat housing on 2008 Lincoln Navigator?
    A: The service procedure for thermostat and thermostat housing begins with engine cooling system drainage. Service procedures on the thermostat housing require removal of the upper radiator hose. The service requires removing the two bolts which secure the thermostat housing and thermostat before discarding the O-ring seal. Installation should include bolt tightening to 10 Nm (89 lb-in) then proceed with backing out the removal technique. Mating surfaces need careful examination followed by cleaning the sealing surfaces using metal surface prep which follows the provided packaging instructions. Afterward replace the O-ring seal.