FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln Navigator Thermostat
Engine Coolant Thermostat- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Thermostat found
2009 Lincoln Navigator Thermostat Part Number: 7L3Z-8575-E
$20.68 MSRP: $32.00You Save: $11.32 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Thermostat Assembly; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 7L3Z-8575-D, 7L3Z-8575-B, AL3Z-8575-B, RT-1196, RT-1230, 3L3Z-8575-AA, 3L3Z-8575-AC, 7L3Z-8575-C, AL3Z-8575-A, RT-1204, RT-1234, RT-1178, RT-1229, RT-1165
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-8575-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Navigator Thermostat
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln Navigator Thermostat Parts Q&A
- Q: How to service the thermostat and thermostat housing on 2009 Lincoln Navigator?A: Draining the engine cooling system must be the first step when servicing the thermostat and its housing. Service of the thermostat housing requires disconnecting the upper radiator hose located at the thermostat housing. First remove the two housing bolts then take out the thermostat while discarding the O-ring seal. The mating surfaces require cleaning with metal surface prep and silicone gasket remover in accordance with the product instructions. When replacing the parts use a spring-oriented thermostat installed against the down position along with a fresh O-ring seal for assembly. Initially secure the thermostat housing with an equal hand torque before final tightening it to 10 Nm (89 lb-in). The installation must end with reversing the removal process.