How to service the blower motor on 2008 Lincoln Town Car?

The blower motor service begins by removing the washer fluid reservoir bolt then setting the windshield washer fluid reservoir to the side. After removing the screws from the back section of the right-hand fender apron you can place the apron to the side. The blower motor requires you to remove its electrical connector then drive out the three screws fixing the motor in place. Proceed to remove the blower motor and its accompanying blower motor wheel clip. Professional cleaning needs to happen to the blower motor shaft before wheel removal because any remaining corrosion will harm the wheel mounting diameter. Remove the blower motor wheel through the last step. The installation of new components follows the opposite instructions for removal.

OEM 2008 Lincoln Town Car Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2008 Lincoln Town Car Blower Motor
Part Number: 3W1Z-19805-AA
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
- Base No.: 19805
- Item Weight: 4.20 Pounds
- Item Dimensions: 5.9 x 7.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-19805-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Lincoln Town Car Blower Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Town Car Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Town Car Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Town Car Blower Motor Parts Questions & Experts Answers

Q: How to service the blower motor on 2008 Lincoln Town Car?
A: The blower motor service begins by removing the washer fluid reservoir bolt then setting the windshield washer fluid reservoir to the side. After removing the screws from the back section of the right-hand fender apron you can place the apron to the side. The blower motor requires you to remove its electrical connector then drive out the three screws fixing the motor in place. Proceed to remove the blower motor and its accompanying blower motor wheel clip. Professional cleaning needs to happen to the blower motor shaft before wheel removal because any remaining corrosion will harm the wheel mounting diameter. Remove the blower motor wheel through the last step. The installation of new components follows the opposite instructions for removal.