How to service the intake air duct on 2008 Mercury Grand Marquis?

The first step for servicing the intake air duct involves separating the crankcase ventilation hose quick connect coupling from the air cleaner outlet pipe. Users should start by loosening the clamps which secure the air cleaner outlet pipe after which they should remove the pipe. Installation of the air cleaner outlet pipe becomes a reverse sequence of removal moving from the throttle body first to align its tabs properly before tightening the clamps to a torque of 4Nm (35 lb-in). You should tighten the clamps to reach a torque value of 4 Nm (35 lb-in) which ends the installation process.

OEM 2008 Mercury Grand Marquis Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Duct found

View related parts
2008 Mercury Grand Marquis Air Outlet Tube Part Number: 5W1Z-9B659-BE
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose; Outlet Tube
- Manufacturer Note: Without internal hydrocarbon trap(not serviced)., FROM 11-29-04
- Base No.: 9B659
- Item Weight: 3.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-9B659-BE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Mercury Grand Marquis Air Duct

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Grand Marquis Air Duct available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Grand Marquis Air Duct as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Grand Marquis Air Duct Parts Q&A

Q: How to service the intake air duct on 2008 Mercury Grand Marquis?
A: The first step for servicing the intake air duct involves separating the crankcase ventilation hose quick connect coupling from the air cleaner outlet pipe. Users should start by loosening the clamps which secure the air cleaner outlet pipe after which they should remove the pipe. Installation of the air cleaner outlet pipe becomes a reverse sequence of removal moving from the throttle body first to align its tabs properly before tightening the clamps to a torque of 4Nm (35 lb-in). You should tighten the clamps to reach a torque value of 4 Nm (35 lb-in) which ends the installation process.