How to Remove and Replace the Rear Footwell Air Duct in All on 2008 Mercury Mariner?

This procedure needs the removal of driver and front passenger seats combined with the floor console followed by the front door scuff plate trim panels and lower A-pillar trim panels removal. First remove the trim panels on the front door scuff plates then detach the trim pieces beneath the A-pillars. The selector lever cable must be detached from automatic transmission gearshift assemblies by first releasing the cable from the gearshift lever and then removing the bracket with the cable. You should place the carpet aside to see the floor ducts before you disconnect and put away the wiring harness from the LH floor duct. Start by removing the LH floor duct before moving to the pin-type retainer of the RH floor duct and finally removing the RH floor duct. The installation ends by reversing all steps performed when removing the system.

OEM 2008 Mercury Mariner Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Ducts found

View related parts
2008 Mercury Mariner Air Inlet Duct
Part Number: 8L8Z-9B659-A
$44.04 MSRP: $63.00
You Save: $18.96 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose; Intake Coupling; Air Inlet Tube; Air Intake Hose
- Base No.: 9B659
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-9B659-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mariner Submodels:
- Base | 4 Cyl 2.3 L GAS
View related parts
2008 Mercury Mariner Air Inlet Duct, Front
Part Number: 6L8Z-9F843-B
$36.93 MSRP: $50.26
You Save: $13.33 (27%)
ADD TO CART
Product Specifications
- Other Name: Tube - Air Inlet; Engine Air Intake Hose, Front; Intake Coupling; Inlet Tube; Air Intake Hose
- Position: Front
- Replaces: 5L8Z-9F843-BA
- Base No.: 9F843
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.5 x 5.1 x 20.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L8Z-9F843-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mariner Submodels:
- Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2008 Mercury Mariner Air Inlet Duct, Front
Part Number: 5M6Z-9F843-AA
Product Specifications
- Other Name: Tube - Air Inlet; Engine Air Intake Hose, Front; Intake Coupling; Inlet Tube; Air Intake Hose
- Position: Front
- Base No.: 9F843
- Item Weight: 2.50 Pounds
- Item Dimensions: 9.6 x 21.2 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-9F843-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mariner Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

2008 Mercury Mariner Air Duct

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mariner Air Duct available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mariner Air Duct as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mariner Air Duct Parts Questions & Experts Answers

Q: How to Remove and Replace the Rear Footwell Air Duct in All on 2008 Mercury Mariner?
A: This procedure needs the removal of driver and front passenger seats combined with the floor console followed by the front door scuff plate trim panels and lower A-pillar trim panels removal. First remove the trim panels on the front door scuff plates then detach the trim pieces beneath the A-pillars. The selector lever cable must be detached from automatic transmission gearshift assemblies by first releasing the cable from the gearshift lever and then removing the bracket with the cable. You should place the carpet aside to see the floor ducts before you disconnect and put away the wiring harness from the LH floor duct. Start by removing the LH floor duct before moving to the pin-type retainer of the RH floor duct and finally removing the RH floor duct. The installation ends by reversing all steps performed when removing the system.