FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Mariner Thermostat Housing
Engine Coolant Thermostat Housing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostat Housings found
2008 Mercury Mariner Drain Hose Connector, Rear Part Number: 8L8Z-8592-B
$13.78 MSRP: $18.75You Save: $4.97 (27%)Product Specifications- Other Name: Connection Water Outlet; Sunroof Drain Hose Adapter, Rear
- Position: Rear
- Replaces: RH-182, 8L8Z-8592-A
- Base No.: 8594
- Item Weight: 0.20 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-8592-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mariner Thermostat Housing, Lower Part Number: 2M2Z-8592-CD
$81.94 MSRP: $123.58You Save: $41.64 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing, Lower; Thermostat Housing Cover; Connection - Water Outlet; Engine Coolant Thermostat Housing; Water Outlet
- Position: Lower
- Base No.: 8592
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M2Z-8592-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mariner Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mariner Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mariner Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Mariner Thermostat Housing Parts Q&A
- Q: How to Properly Address Issues with the Thermostat Housing on a 2.3L Engine in a 2008 Mercury Mariner?A: A safe method to service the thermostat housing on a 2.3L engine begins with positioning the vehicle in neutral mode on a hoist. Start by draining the cooling system before you proceed to disconnect the accessory drive belt. Detach both hoses from the thermostat housing where they connect to the heater and lower portion of the radiator. Secure the thermostat housing by removing its three securing bolts and gasket. Follow up the new thermostat housing installation by tightening it to 10 Nm (89 lb-in). Inspection of the gasket will determine whether you need to install a new one. The cooling system requires completing with filling and bleeding.