FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Milan A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 A/C Hoses found
2008 Mercury Milan Discharge Hose Part Number: 6E5Z-19D734-AB
$149.44 MSRP: $206.74You Save: $57.30 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: YF-3218, 6E5Z-19D734-AA
- Base No.: 19D734
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.9 x 21.1 x 30.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19D734-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Discharge Hose Part Number: 6E5Z-19D734-BA
Product Specifications- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Base No.: 19D734
- Item Weight: 3.20 Pounds
- Item Dimensions: 25.4 x 12.6 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19D734-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Suction Hose Part Number: 6E5Z-19835-BA
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube
- Base No.: 19835B
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.0 x 11.6 x 24.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Suction Hose Part Number: 6E5Z-19835-AA
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Pressure Line
- Base No.: 19835A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.5 x 8.2 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan A/C Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Milan A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Milan A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Milan A/C Hose Parts Q&A
- Q: How to Service and Repair the A/C Hose Compressor Manifold and Tube Assembly on 2008 Mercury Milan?A: The first step for repairing the compressor manifold and tubes is refrigerant recovery followed by hoisting the vehicle in neutral. First separate the two coolant reservoir hose retainers from the assembly and afterward remove the washer reservoir filler neck bolt while tightening it to 6 Nm (53 lb-in) during reassembly. Start by taking off the suction fitting nut from the compressor manifold and tube then disconnect the fitting before disposing of its gasket seal while tightening the fitting to 15 Nm (11 lb-ft) during reinstallation. The process also involves removing the condenser inlet fitting nut followed by disconnecting the fitting and discarding the gasket seal seal while tightening it to 15 Nm (11 lb-ft). Detach the compressor manifold from the A/C compressor by removing its bolt from the lower engine splash shield and compressor manifold bolt. Replace the gasket seals with new ones then tighten the bolt to 15 Nm (11 lb-ft) during reinstallation. During reinstallation of the three secondary air injection pump bolts tighten them to 30 Nm (22 lb-ft). Reverse the removal process of compressor manifold and tube assembly while adding new gasket seals and correctly applying clean PAG oil to the refrigerant system. The refrigerator system needs evacuation followed by leak testing before charging.