How to Service and Repair the EGR Valve System Module on 2008 Mercury Mountaineer?

The EGR system module service requires disconnecting electrical vacuum connectors and upper exhaust manifold after removing the EGR system module-to-exhaust manifold tube. This should be tightened to 40 Nm (30 lb-ft) before reinstallation. Start by placing the new EGR module gasket with its raised circle side toward the intake manifold before you remove all the bolts, the EGR system module along with the gasket which you should discard. Use a new EGR system module gasket for sealing the cleaned surfaces first before following the installation procedure and tightening the gasket to 25 Nm (18 lb-ft).

OEM 2008 Mercury Mountaineer EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Valve found

View related parts
2008 Mercury Mountaineer EGR Valve
Part Number: 5L2Z-9D475-A
$141.98 MSRP: $225.45
You Save: $83.47 (38%)
Product Specifications
- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 4L2Z-9D475-A, 4L2Z-9D475-HA
- Base No.: 9D475
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.1 x 4.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-9D475-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS

2008 Mercury Mountaineer EGR Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mountaineer EGR Valve Parts Questions & Experts Answers

Q: How to Service and Repair the EGR Valve System Module on 2008 Mercury Mountaineer?
A: The EGR system module service requires disconnecting electrical vacuum connectors and upper exhaust manifold after removing the EGR system module-to-exhaust manifold tube. This should be tightened to 40 Nm (30 lb-ft) before reinstallation. Start by placing the new EGR module gasket with its raised circle side toward the intake manifold before you remove all the bolts, the EGR system module along with the gasket which you should discard. Use a new EGR system module gasket for sealing the cleaned surfaces first before following the installation procedure and tightening the gasket to 25 Nm (18 lb-ft).