How to Service and Repair the Motor and Transmission Mount for a Four Wheel Drive (4WD) on 2008 Mercury Mountaineer?

Service and repair of Four Wheel Drive (4WD) transmission mount requires the vehicle to rest on a hoist with NEUTRAL transmission position. Begin by removing the skid plate bolts along with the skid plate only when applicable. Support the transmission through the use of a transmission jack while you remove the two nuts and two bolts from the transmission support insulator along with noting that the left-side example applies equally to the right-side procedure. Hoist the transmission after setting it to NEUTRAL for removing the transmission support insulator. The new transmission support insulator requires securement with two transmission support insulator bolts which should be tightened to 90 Nm (66 lb-ft). After lowering the transmission install the two transmission support insulator nuts by torquing them to 90 Nm (66 lb-ft). Install the skid plate along with its bolts and tighten them to 24 Nm (18 lb-ft).

OEM 2008 Mercury Mountaineer Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Motor And Transmission Mounts found

View related parts
2008 Mercury Mountaineer Motor Mount Bracket, Driver Side
Part Number: 7A2Z-6031-AA
$17.30 MSRP: $23.54
You Save: $6.24 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 3.50 Pounds
- Item Dimensions: 5.9 x 4.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Motor Mount, Passenger Side
Part Number: 7A2Z-6038-D
$70.30 MSRP: $102.33
You Save: $32.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: 5L2Z-6038-AD, 7A2Z-6038-B, 5L2Z-6038-BB, 5L2Z-6038-AB, 6L2Z-6038-AB, 5L2Z-6038-BD
- Base No.: 6038A
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.0 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6038-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Motor Mount, Driver Side
Part Number: 6L2Z-6031-BA
$28.44 MSRP: $39.34
You Save: $10.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount Bracket; Front Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: 7A2Z-6031-BB
- Base No.: 6031
- Item Weight: 3.70 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6031-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Transmission Mount
Part Number: 8L2Z-6068-C
$11.36 MSRP: $15.72
You Save: $4.36 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Replaces: 6L2Z-6068-BA
- Base No.: 6068A
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Premier | 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Motor Mount Bracket, Passenger Side
Part Number: 5L2Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 7A2Z-6030-BA
- Base No.: 6030
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.4 x 4.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Motor Mount, Driver Side
Part Number: 7A2Z-6038-CA
$62.98 MSRP: $91.67
You Save: $28.69 (32%)
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: 7A2Z-6038-C, 7A2Z-6038-A
- Base No.: 6038B
- Item Weight: 4.70 Pounds
- Item Dimensions: 7.1 x 5.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Rear Support
Part Number: 1L2Z-6A023-AA
Product Specifications
- Other Name: Crossmember; Transmission Crossmember; Motor Mount
- Base No.: 6A023
- Item Weight: 18.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Transmission Mount
Part Number: 8L2Z-6068-B
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Transmission Mounts; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Replaces: 6L2Z-6068-AA
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Trans Crossmember
Part Number: 6L2Z-6A023-AB
Product Specifications
- Other Name: Support; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Motor Mount; Rear Support
- Base No.: 6A023
- Item Weight: 22.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6A023-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS
View related parts
2008 Mercury Mountaineer Motor Mount Bracket, Passenger Side
Part Number: 6L2Z-6030-AA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6030-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Transmission Mount
Part Number: 8L2Z-6068-A
$33.37 MSRP: $47.33
You Save: $13.96 (30%)
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 7A2Z-6068-A
- Base No.: 6068
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Mercury Mountaineer Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mountaineer Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount for a Four Wheel Drive (4WD) on 2008 Mercury Mountaineer?
A: Service and repair of Four Wheel Drive (4WD) transmission mount requires the vehicle to rest on a hoist with NEUTRAL transmission position. Begin by removing the skid plate bolts along with the skid plate only when applicable. Support the transmission through the use of a transmission jack while you remove the two nuts and two bolts from the transmission support insulator along with noting that the left-side example applies equally to the right-side procedure. Hoist the transmission after setting it to NEUTRAL for removing the transmission support insulator. The new transmission support insulator requires securement with two transmission support insulator bolts which should be tightened to 90 Nm (66 lb-ft). After lowering the transmission install the two transmission support insulator nuts by torquing them to 90 Nm (66 lb-ft). Install the skid plate along with its bolts and tighten them to 24 Nm (18 lb-ft).