FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Sable Muffler
Exhaust Muffler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Mufflers found
2008 Mercury Sable Muffler & Pipe, Rear Part Number: 8T5Z-5230-F
$495.56 MSRP: $679.92You Save: $184.36 (28%)Product Specifications- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 8T5Z-5230-C, 8T5Z-5230-A
- Base No.: 5230
- Item Weight: 39.20 Pounds
- Item Dimensions: 33.1 x 13.3 x 117.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T5Z-5230-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Sable Muffler & Pipe, Rear Part Number: 8T5Z-5230-E
Product Specifications- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 8T5Z-5230-D, 8T5Z-5230-B
- Base No.: 5230
- Item Weight: 45.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T5Z-5230-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Sable Muffler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Sable Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Sable Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Sable Muffler Parts Q&A
- Q: How to service the muffler and tailpipe on 2008 Mercury Sable?A: Start muffler and tailpipe servicing by positioning the vehicle in neutral gear and hoisting it up before proceeding. Use a suitable jackstand to support both the muffler and tailpipe during maintenance. Replace the two exhaust Y-pipe flange nuts together with the gasket before installing new parts and snug them to 40 Nm (30 lb-ft). Soapy water will aid in removing isolators while you must avoid breaking or tearing them. Carefully extract the muffler and tailpipe assembly from the vehicle through the isolator separation process. The installation process starts by undoing the removal steps and includes fresh gasket and nut installation combined with isolator inspection where necessary replacements are needed. Start the engine to examine exhaust leaks during the last step.