FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Sable Muffler
Exhaust Muffler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Mufflers found
2009 Mercury Sable Muffler & Pipe, Rear Part Number: 8T5Z-5230-F
$495.56 MSRP: $679.92You Save: $184.36 (28%)Product Specifications- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 8T5Z-5230-C, 8T5Z-5230-A
- Base No.: 5230
- Item Weight: 39.20 Pounds
- Item Dimensions: 33.1 x 13.3 x 117.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T5Z-5230-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Sable Muffler & Pipe, Rear Part Number: 8T5Z-5230-E
Product Specifications- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 8T5Z-5230-D, 8T5Z-5230-B
- Base No.: 5230
- Item Weight: 45.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T5Z-5230-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Sable Muffler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Sable Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Sable Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Sable Muffler Parts Q&A
- Q: How to Service the Tail Pipe and Muffler on 2009 Mercury Sable?A: Service of the muffler and tailpipe begins by fitting the vehicle onto a hoist in the neutral position. Position the vehicle slip on a hoist into neutral while you use a suitable jackstand to stabilize muffler and tailpipe. After that loosen the Torca® clamp nut. Reinstall the clamp while tightening it to 55 Nm (41 lb-ft). For muffler and tailpipe removal the isolators need careful attention to prevent breakage; applying soapy water will help detach the three isolators and extract the muffler and tailpipe assembly from the vehicle. The installation process requires the return of removal steps while replacing gaskets and nuts along with inspections for replacements of any damaged isolators. The engine start-up should be followed by exhaust leak testing.