How to Service and Repair the Antenna Cable on 2009 Ford Crown Victoria?

The antenna lead-in service starts with removing the audio unit from its place. You should start by removing the pin-type retainers from the right-hand lower instrument panel insulator while releasing its locking tab to take out the insulator. Disconnect first the courtesy lamp then the antenna lead-in cable before unclipping the antenna lead-in cable pin-type locator retainer. Remove the three retainers together with the antenna lead-in cable. The installation ends by following the reverse order of uninstallation.

OEM 2009 Ford Crown Victoria Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2009 Ford Crown Victoria Extension, Front
Part Number: 6W7Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Front; Cable
- Position: Front
- Base No.: 18812
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria Cable, Rear
Part Number: 7W7Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear; Amplifier
- Position: Rear
- Replaces: 6W7Z-18812-B
- Base No.: 18812
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7W7Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria Cable, Center
Part Number: 6W7Z-18812-E
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Center
- Position: Center
- Replaces: 6W7Z-18812-C
- Base No.: 18812
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-18812-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Ford Crown Victoria Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Crown Victoria Antenna Cable Parts Questions & Experts Answers

Q: How to Service and Repair the Antenna Cable on 2009 Ford Crown Victoria?
A: The antenna lead-in service starts with removing the audio unit from its place. You should start by removing the pin-type retainers from the right-hand lower instrument panel insulator while releasing its locking tab to take out the insulator. Disconnect first the courtesy lamp then the antenna lead-in cable before unclipping the antenna lead-in cable pin-type locator retainer. Remove the three retainers together with the antenna lead-in cable. The installation ends by following the reverse order of uninstallation.