FordParts
My Garage
My Account
Cart
OEM 2009 Ford E-150 Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Battery Cables found
2009 Ford E-150 Battery Cable
Part Number: 9C2Z-14300-VB$136.03 MSRP: $216.00You Save: $79.97 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-VA, WC-96100
- Base No.: 14300A
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.0 x 7.8 x 34.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-14300-VB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Battery Cable
Part Number: 9C2Z-14300-SB$136.14 MSRP: $224.00You Save: $87.86 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-SA
- Base No.: 14300A
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.2 x 16.3 x 24.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-14300-SB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Battery Cable
Part Number: 4C2Z-14300-HAProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Base No.: 14300
- Item Weight: 3.80 Pounds
- Item Dimensions: 16.2 x 3.8 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-14300-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Battery Cable
Part Number: 9C2Z-14300-RBProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 9C2Z-14300-RA, WC-96098
- Base No.: 14300A
- Item Weight: 3.10 Pounds
- Item Dimensions: 17.0 x 4.2 x 16.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-14300-RB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Battery Cable
Part Number: 9C2Z-14300-JAProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Base No.: 14300B
- Item Weight: 2.90 Pounds
- Item Dimensions: 19.6 x 4.1 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-14300-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-150 Battery Cable Parts Questions & Experts Answers
- Q: How to service and repair the battery cables on gasoline engines on 2009 Ford E-150?A: You should start battery cable service and repair on gasoline engines by taking out the battery. After removing the bolt you must put aside the ground cable eyelet for the battery before tightening it to 12 Nm (106 lb-in) during reinstallation. Take out the nut while placing the Battery Junction Box (BJB) terminals to the side before tightening them to 12 Nm (106 lb-in) for installation. When reattaching the generator B+ terminal nut it needs to be tightened to 17 Nm (150 lb-in). First detach the starter solenoid wire in-line connector and disconnect both harness locators from the frame then disconnect the three harness locators that are attached to the engine. Set aside the battery cable lower bracket by removing the nut and tightening to 15 Nm for 4.6L engines or 30 Nm for 5.4L and 6.8L engines. Detach both pieces that connect the transmission cooler line to the battery cable lower bracket before taking out the starter solenoid terminal cover. The starter solenoid positive cable needs removal through a nut which should be tightened to 12 Nm (106 lb-in) after device replacement. Remove the nut and set aside the starter solenoid wire terminal while tightening it to 5 Nm (44 lb-in) when performing installation. When reinstalling the battery in position remove its nut to reposition the ground cable terminal. Roll the nut tighten amount to 25 Nm (18 lb-ft). Execute the installation procedure by first reversing the steps of battery cable assembly removal.
Related 2009 Ford E-150 Parts
2009 Ford E-150 Alternator
2009 Ford E-150 Alternator Bracket
2009 Ford E-150 Battery Tray
2009 Ford E-150 Car Batteries
2009 Ford E-150 Starter