FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Antenna Cables found
2009 Ford Edge Antenna Cable, Rear Part Number: 9T4Z-18812-B
$22.79 MSRP: $31.01You Save: $8.22 (27%)Product Specifications- Other Name: Cable Assembly - Extension; Antenna Cable, Rear
- Manufacturer Note: Connects To Antenna Base Assembly
- Position: Rear
- Replaces: 7T4Z-18812-B, 7T4Z-18812-C
- Base No.: 18812B
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-18812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Antenna Cable, Front Part Number: 9T4Z-18812-A
$21.00 MSRP: $29.06You Save: $8.06 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Extension; Antenna Cable, Front
- Manufacturer Note: Attaches To Radio Receiver
- Position: Front
- Replaces: 7T4Z-18812-D, 7T4Z-18812-A
- Base No.: 18812A
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Antenna Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Antenna Cable Parts Q&A
- Q: How to service and repair the AM/FM antenna cable on 2009 Ford Edge?A: Begin service and repairs of AM/FM antenna cable only once you remove the Audio Control Module (ACM). Begin by removing the front interior lamp with the right-hand (RH) A-pillar trim panel. Detach the AM/FM antenna base bolt and remove its cable connection to the antenna before tightening both components to 7 Nm (62 lb-in). Both the RH sun visor and headliner need to be lowered for access to the AM/FM antenna cable bolt before removing the bolt and cable along with securing the bolt at 12 Nm (106 lb-in) when reinstalling. First disconnect the scuff plate on the RH front door before unjoining the antenna cables then free the antenna cable from its pin-type retainers for complete removal. Finish the process by performing the reverse steps of removal for antenna installation.