FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Engine Mount
Engine Motor Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Engine Mounts found
2009 Ford Edge Transmission Mount, Driver Side Part Number: 7A1Z-6038-AA
$86.65 MSRP: $126.13You Save: $39.48 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount, Left; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Mount
- Manufacturer Note: INSULATOR
- Position: Driver Side
- Replaces: 7T4Z-6038-AD
- Base No.: 6038
- Item Weight: 8.90 Pounds
- Item Dimensions: 9.5 x 9.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Transmission Mount Part Number: 8T4Z-6068-B
$61.99 MSRP: $76.67You Save: $14.68 (20%)Product Specifications- Other Name: Housing; Transfer Case Mount
- Replaces: 8T4Z-6068-A
- Base No.: 6068
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.1 x 4.5 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Motor Mount, Passenger Side Part Number: 8T4Z-6038-A
$128.24 MSRP: $186.67You Save: $58.43 (32%)Product Specifications- Other Name: Bracket - Insulator Mounting; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: Bracket And Insulator
- Position: Passenger Side
- Replaces: 7T4Z-6038-AA
- Base No.: 6F012
- Item Weight: 13.70 Pounds
- Item Dimensions: 12.6 x 12.5 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Mount Bracket, Front Passenger Side Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90You Save: $34.17 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Base No.: 6038
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.0 x 8.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8M8Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Engine Bracket, Driver Side Part Number: 8T4Z-6031-B
$59.56 MSRP: $91.48You Save: $31.92 (35%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket - Engine Mounting
- Manufacturer Note: INSULATOR
- Position: Driver Side
- Replaced by: DT4Z-6031-A
- Base No.: 6031
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.4 x 8.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-6031-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Engine Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Engine Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Engine Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Engine Mount Parts Q&A
- Q: How to remove and install the engine mount on 2009 Ford Edge?A: The procedure for engine mount removal requires positioning the vehicle on a hoist with neutral gear selection. First disconnect the 2 exhaust hangers followed by loosening the exhaust flexible pipe clamp to remove all components including 4 nuts, the exhaust flexible pipe assembly, the Y-pipe from the vehicle as a single unit. Replace the nuts with new ones along with discarding the gasket. First remove the two nuts that secure the roll restrictor heat shield before loosening the roll restrictor-to-subframe through bolt. First, extract the through bolt from the roll restrictor through bolt and then separate the 2 roll restrictor bracket plate bolts before removing the 3 bolts of the transaxle bracket. When setting up the oil pan holding fixture users need to carefully match it with the mounting bosses at the oil pan before placing it under the pan near a floor jack. First remove the 3 bolts from the engine coolant degas bottle and place it to the side before proceeding with the nut and bolt removal of the engine mount brace. Begin engine mount removal by extracting first the 4 engine mount nuts and after that the 3 engine mount bolts. To install the engine mount begin with its placement and secure it through tightening the 3 bolts to 90 Nm (66 lb-ft). Begin by installing the 4 engine mount nuts while applying a torque of 63 Nm (46 lb-ft) and afterward tighten the engine mount brace along with its nut and bolt at 20 Nm (177 lb-in). Put the engine coolant degas bottle into position before securing it with the 3 bolts which must be tightened to 9 Nm (80 lb-in). First securely fasten the transaxle bracket through its 3 bolts to 90 Nm (66 lb-ft). Proceed with engine roll restrictor and transaxle bracket installation along with 3 bolts which require torquing to 90 Nm (66 lb-ft). Fasten the roll restrictor-to-subframe through bolt to 103 Nm (76 lb-ft) before installing the roll restrictor heat shield and tightening its 2 nuts to 11 Nm (97 lb-in). The Y-pipe assembly installation requires a new gasket before positioning the assembly and securing it with 4 new nuts that you should tighten to 40 Nm (30 lb-ft). Then install the 2 exhaust hangers before clamping the exhaust to 40 Nm (30 lb-ft).