FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Manifolds found
2009 Ford Edge Intake Manifold, Lower Part Number: 7T4Z-9424-C
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Lower
- Position: Lower
- Base No.: 9424A
- Item Weight: 7.60 Pounds
- Item Dimensions: 18.5 x 8.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9424-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Intake Manifold, Upper Part Number: 7T4Z-9424-E
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper
- Position: Upper
- Base No.: 9424A
- Item Weight: 14.70 Pounds
- Item Dimensions: 17.6 x 15.7 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9424-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Intake Manifold Parts Q&A
- Q: How to service the lower intake manifold on 2009 Ford Edge?A: Start the process of servicing the lower intake manifold when the vehicle is set to neutral position on a hoist. First empty the coolant and remove the fuel rail alongside the air cleaner assembly. Remove the three bolts that connect the thermostat housing to the lower intake manifold then detach ten bolts from the lower intake manifold. The intake manifold and thermostat housing gaskets should be thrown away while ending every sealing surface with a thorough cleaning and inspection. The presence of metal debris in the intake manifold requires a new part to protect the engine from damages when replacement or repair occurred due to upper engine failure. Start installation by fitting new gaskets between lower intake manifold and thermostat housing while aligning the parts together and tightening their ten attaching bolts to 10 Nm (89 lb-in) torque according to the designated order. The three thermostat housing-to-lower intake manifold bolts should be installed next followed by torquing them to 10 Nm (89 lb-in). After reattaching the ACL assembly and the fuel rail you must conduct a cooling system fill-up and bleeding process.