My Garage
Cart

OEM 2009 Ford Edge Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

  • 2009 Ford Edge Parking Brake Cable - 7T4Z-2A603-A
    2009 Ford Edge Parking Brake Cable Diagram - 7T4Z-2A603-A
    View related parts

    2009 Ford Edge Rear Cable, Passenger Side Part Number: 7T4Z-2A603-A

    $28.11 MSRP: $38.26
    You Save: $10.15 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Passenger Side
    • Base No.: 2A635
    • Item Weight: 1.50 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7T4Z-2A603-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
  • 2009 Ford Edge Parking Brake Cable - 7T4Z-2A635-A
    2009 Ford Edge Parking Brake Cable Diagram - 7T4Z-2A635-A
    View related parts
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Driver Side
    • Base No.: 2A635
    • Item Weight: 1.60 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7T4Z-2A635-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
  • 2009 Ford Edge Parking Brake Cable - 8T4Z-2853-A
    2009 Ford Edge Parking Brake Cable Diagram - 8T4Z-2853-A
    View related parts
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Replaces: 7T4Z-2853-B
    • Base No.: 2853
    • Item Weight: 2.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8T4Z-2853-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2009 Ford Edge Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Edge Parking Brake Cable Parts Q&A

  • Q: How to service and repair the rear left parking brake cable on all on 2009 Ford Edge?
    A: All vehicles require a hoist setup while in neutral gear for serving and repairing the rear left parking brake cable. The parking brake cable tension will release once you loosen the equalizer adjustment nut before separating the left-hand cable from the equalizer through tab compression of the bracket. Remove the bolt of the wheel speed sensor from all-wheel drive vehicles and keep the sensor safe until reinstallation because you will need to torque it to 7 Nm (62 lb-in). Allow the two bolts securing the parking brake cable-to-support plate to be removed while disconnecting the cable from the lever by using 23 Nm (17 lb-ft) torque for the installation phase. The stabilizer bar link requires its nut to be removed so we can place the link properly aside before retightening it to 35 Nm (26 lb-ft). After removing the front bracket bolt and middle bracket bolt along with the parking brake cable mount them back with a torque of 23 Nm (17 lb-ft). To complete the reinstallation reverse the steps of cable removal then attach the new cable and adjust the parking brake cable according to specifications.

Related 2009 Ford Edge Parts